Data is being updated.

**hkpower**

Please help i am getting this message on the screen "Data is being updated" on my The box Super USB. What should I do? please help......

**stokie63**

download the fix at top of threads and install in your box. make sure you download the right fix.

**hkpower**

Thanks downloaded but how do i install to the box?

**stokie63**

connect your box to your pc using a 9 pin null modem lead and install the fix and it should be ok read the threads on your fix everythings in them to guide you.

**bmulvany**

cool Ill download it now, does this work for all providers

**boxuser**

I hope it works

**unadkat**

Originally Posted by boxuser

I hope it works

make sure after the fix is applied you do a factory reset and rescan the channels.

access the cas :

switch on Emu

Set default access key

exit 3 times

wait for the code to update

**mckeogh** · 11:17 PM

mine keeps saying the same thing..i tried all the above but still its the same? do I need to update gtRom v.4.00 to 4.3? Im very confused any help would be greatly appreciated thanks in advance..

sorry if i posted this all wrong!

**FoxForceFive**

Originally Posted by mckeogh

mine keeps saying the same thing..i tried all the above but still its the same? do I need to update gtRom v.4.00 to 4.3? Im very confused any help would be greatly appreciated thanks in advance..

sorry if i posted this all wrong!

You need to re-flash to update the firmware to the one released on the 30/11/08 mate.

**ramones**

I've the same problem but no cable. I've been reading around and believe it's possible to manually enter keys but that it's only a temporary solution?

**cng1958**

ramones if you look at downloads section,depending on which model you have,you can update your box.If you are unsure look through the forum for any additional help

**cng1958**

There is the options for all the providers

**fredsuthers**

Have you tried the following (Quoting Satsmo):

Press menu - type 1570 on remote - check key emu is enabled - press default key - exit out to Discovery Turbo and see if it updates.

If that helps thank Satsmo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Data from Tecdoc	Nismo	General Automotive Discussion	16	13th March, 2010 11:37 AM
ex 5000 channel data	bl4ggs	Eurovox	0	1st December, 2008 03:28 PM
The Box Super USB.. Data Being Updated	clockwork	Starview	2	28th November, 2008 11:20 AM
Editing transponder data.	Curious123	Sat Dreambox	6	25th September, 2008 08:15 AM
Data Loggers.	ZBET	General Cable TV	0	10th July, 2008 04:38 AM

hkpower Newbie Join Date: Dec 2008 Posts: 7 Thanks: 1 Thanked 0 Times in 0 Posts Downloads: 2 Uploads: 0	Data is being updated. Please help i am getting this message on the screen "Data is being updated" on my The box Super USB. What should I do? please help......

stokie63 Junior Member Join Date: Nov 2008 Posts: 41 Thanks: 0 Thanked 1 Time in 1 Post Downloads: 7 Uploads: 0	download the fix at top of threads and install in your box. make sure you download the right fix.

bmulvany Newbie Join Date: Dec 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Downloads: 2 Uploads: 0	cool Ill download it now, does this work for all providers

boxuser Newbie Join Date: Dec 2008 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts Downloads: 5 Uploads: 0	Thanks I hope it works

mckeogh Newbie Join Date: Dec 2008 Posts: 1 Thanks: 1 Thanked 0 Times in 0 Posts Downloads: 1 Uploads: 0	having same trouble mine keeps saying the same thing..i tried all the above but still its the same? do I need to update gtRom v.4.00 to 4.3? Im very confused any help would be greatly appreciated thanks in advance.. sorry if i posted this all wrong! Last edited by mckeogh; 18th December, 2008 at 11:17 PM. Reason: I think I messed up..should i have posted in here?

ramones Newbie Join Date: Dec 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Downloads: 1 Uploads: 0	I've the same problem but no cable. I've been reading around and believe it's possible to manually enter keys but that it's only a temporary solution?

cng1958 Junior Member Join Date: Nov 2008 Posts: 22 Thanks: 2 Thanked 3 Times in 3 Posts Downloads: 12 Uploads: 0	ramones if you look at downloads section,depending on which model you have,you can update your box.If you are unsure look through the forum for any additional help

fredsuthers Member Join Date: Dec 2008 Posts: 79 Thanks: 16 Thanked 11 Times in 11 Posts Downloads: 8 Uploads: 0	Have you tried the following (Quoting Satsmo): Press menu - type 1570 on remote - check key emu is enabled - press default key - exit out to Discovery Turbo and see if it updates. If that helps thank Satsmo