Starview HD Combo LAN & NON LAN STBs

**satsmo** · 17th December, 2009, 09:55 PM

Non LAN, (No ethernet port), Combo Serial latest firmware http://www.digital-kaos.co.uk/forums...al-model-1116/

The NON LAN, serial only boxes were the first 500 batch that were released.

CAPABLE OF RECEIVING SATELLITE AND CABLE TRANSMISSIONS SIMULTANEOUSLY

INDEPENDENT SATELLITE AND CABLE HD TUNERS
EMBEDDED TWIN CI SLOT
EMBEDDED CARD READER

2 X USB PORTS
PVR READY VIA BOTH USB PORTS
Supports MPEG-2, MPEG-4 H.264 and fully DVB Compliant
Diseqc 1.0,1.1,1.2 and USALS
Aspect ratio adjustment 4:3 (16/9 crop) 4:3 (16/9 letterbox) 16:9 (4/3 pillar box)

User friendly OSD and Operation
Total 8000 Programmable Channels
Multi Language audio support & Multi-Language Menu Text Support

Favorite Channel Selection
parental guide and rating control
EPG (provider Electronic Program Guide) Inc on screen channel info
On-screen Display with 65,356 color
Blind Scan (powerscan) and powerful EPG

8psk Turbo FEC Option
Zoom function in pause
Dolby Digital Bitstream out through S/pdif (Optical and coaxal)
selectable output for 1080i,720p,480p and 480i format
Multiple video outputs HDMI 1.1, Component (YPbPr) Composite
USB 2 Host (access to HDD, USB memory, Others ect 2 x ports onboard

Upgrade software and channel list via usb2.0 and rs 232
MP3 file play by usb2.0
Recorded file play on PC

Reservation recording via EPG

I have not tried this box out yet, but would be interested to see how others will fair out with it.

I will sticky it for now.

To Flash Box:

Load grooverider file on to your usb memory stick, make sure power is off on machine.
Insert the memory stick into the front usb socket underneath the front flap.

Turn the HD Combo on.

From the main menu go to Utility and then press the right arrow button and select usb from the right hand side, you will see the grooverider file press ok on it and make sure to select SW+ALL DATA UPDATE.. the machine will update and restart (don't pull your memory stick out until the machine has fully started up).

MAKE SURE YOU LOAD THE GROOVERIDER FILE FIRST THEN THE BOOT FILE FOLLOWING THE INFORMATION BELOW

How to Upgrade inc new boot file.
1) File name GrooveRider_HD_Combo_F3.50_1118.uad upgrade with S/W + All Data Upgrade first.
2) Then Upgrade again withBoot_V0021 ( type : sw upgrade )
3) Power on/off at the back and then factory re-set
Check your system information says LDR:Ver 00.21

You now need to scan your channels, so go to installation press the right arrow button again and go down to AUTO CABLE SEARCH all you need to change here is the symbol rate.

The symbol rate determines your area for example nt* is 6887, the other 6952 are for telewe*t and EXc&w.
When you have selected your area go to start scan.

Once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989" you will then see
"keyedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.
then go to to your channels by exiting the menu and pressing ok.. Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UP TO 5 MINUTES TO UPDATE

Channel list..

All your channels are categorised pressing ok on your remote brings up the channel list but it will be in simple layout, pressing the red button takes you to detail, now if your list don't appear to be categorised you will need to press the SAT button on the remote and you need to select cable at the bottom of the list this will then give you the categories, to change each section you simply use your left or right arrow buttons.

**satsmo** · 17th December, 2009, 10:07 PM

THIS IS FOR THE LAN, (STB WITH ETHERNET PORT), BOX ONLY THIS FILE WILL KILL A NON LAN BOX YOU HAVE BEEN WARNED AS THEY ARE NOT COMPATIBLE.

Readme:

THIS IS FOR LAN 1214 BOX

DO NOT LOAD THIS FILE ON A NON LAN BOX OR IT WILL KILL YOUR BOX YOU HAVE BEEN WARNED !!!!!!

NON LAN BOX IS THE BOX THAT DOES NOT HAVE A RS232 CONNECTOR ON THE BACK OF THE UNIT THIS WAS THE FIRST BATCH OF 500 SOLD !!!!

Load grooverider file on to your usb memory stick,make sure power is off on machine and insert the memory stick into the front usb socket
underneath the front flap.

Turn the HD Combo on.

From the main menu go to Utility and then press the right arrow button and select usb
from the right hand side, you will see the grooverider file press ok on it and make sure to select SW+ALL DATA UPDATE..

the machine will update and restart (don't pull your memory stick out until the machine has fully started up)
you now need to scan your channels,
so go to installation press the right arrow button again and go down to AUTO CABLE SEARCH
all you need to change here is the symbol rate.
The symbol rate determines your area for example ntl is 6887, the other numbers are 6952 for telecast and EXc&w.
When you have selected your area go to start scan.

once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "keyedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.

Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE

Channel list..

all your channels are categorised by
pressing ok on your remote brings up the channel list but it will be in simple layout,
pressing the red button takes you to detail,
now if your list don't appear to be categorised you will need to press the SAT button on the remote and you need to select cable
at the bottom of the list this will then give you the categories,
to change each section you simply use your left or right arrow buttons

GOOD LUCK
GrOOvErIDer

For Sat set please look at end of readme Click Here

NOTE UPDATED FILES BELOW:

http://www.digital-kaos.co.uk/forums...531_1207-1474/

**manazero786** · 17th December, 2009, 10:22 PM

i am still trying got same problem

**satsmo** · 17th December, 2009, 10:29 PM

Trying what???

**bjorn** · 17th December, 2009, 10:52 PM

Hi,

Just posting to give me access to download the latest software for the starview HD, have tried the file marked grove rider but majority of channels are still scrambled.

**satsmo** · 17th December, 2009, 10:54 PM

More here than downloads take a look around, starting with the differences between the two files above.

**mark8393** · 17th December, 2009, 11:02 PM

Originally Posted by bjorn

Hi,

Just posting to give me access to download the latest software for the starview HD, have tried the file marked grove rider but majority of channels are still scrambled.

they will be, just follow instructions, as long as right firmware is loaded.

**Jambo44** · 18th December, 2009, 02:03 PM

Originally Posted by satsmo

THIS IS FOR THE LAN, (STB WITH ETHERNET PORT), BOX ONLY THIS FILE WILL KILL A NON LAN BOX YOU HAVE BEEN WARNED AS THEY ARE NOT COMPATIBLE.

- 7Days EPG update every area.
- Update Scan/channel List menu issue.
- USB menu update.
- Video Output setting update ("HDMI + YPbPr + CVBS", "RGB SCART")
- Satellite scan update.

Firmware and full instructions for cable and sat can be found here Digital Kaos - Downloads - Starview HD Combo LAN Firmware

Thanks for your help. I'm sorted.

**dazwigan** · 18th December, 2009, 08:55 PM

hi quick question . is ther any fix for the channel auto sort or 1 available soon for the starview hd combo ?

**bill4676** · 20th December, 2009, 05:19 PM

hi am looking on buying a hd combo box but will i get all channels from sky like i do with my starview supper box on vm cable or do i need a card to view the sky channles or is it patched with the firmwire to recieve all satilite channles with out having to subcribe to sky to watch

**lincsat** · 20th December, 2009, 05:52 PM

Not sure how much EPG you will get on Satellite, unlike cable, most non-official boxes only get Now & Next.

**Voyageur** · 26th December, 2009, 05:57 PM

Many thanks for this - I've just joined, because I've bought one of these (in addition to existing Kryptview and ITGate), to get HD and LAN - it all seems a bit daunting, but here goes!