[aftermath]

@ Patrick83

i never tried that way, i always do it this way, once you do it, its 10x easier from then on. How to install enigma 2 to ipbox 9000HD


TBH there is not much on E2 at the moment, i put it on but the cams that are available for it , only Camd3 seems to pick up channels ( only FTA ) i may add.

It does have incubuscam but i am not sure if it is ready yet to be able to use for its purpose yet.

[patrick83]

Thanks for your replay on christmas,

actually I followed the description that is pretty good but as I mentioned it doesn't work. the usb-stick has two partitions, both ext2, the image is correctly decompressed and the setenvs are modified with my IP-Adresses. what can be the mistake?

[aftermath]

are you holding down the "3" button on remote for 5 seconds when switching on, thats if you got a Hard drive installed.

or the "2" button if you dont have hard drive.

[krazylegz]

from what i've read incubuscam acts as CCcam.....

[pege63]

Can you do this GUIDE in MS WORD?

[aftermath]

your welcome to transfer to MS word ot Notepad if you want, but cant see what difference it will do.

[igirock]

can i E2 my iPBox 910 too...

[aftermath]

Originally Posted by igirock can i E2 my iPBox 910 too...

yes you can m8.....................

[eivi]

Originally Posted by aftermath your welcome to transfer to MS word ot Notepad if you want, but cant see what difference it will do.

For me e2 says -sorry, something is wrong - what is the best way to get back to previous state?

[aftermath]

Originally Posted by eivi For me e2 says -sorry, something is wrong - what is the best way to get back to previous state?

can you give a bit more information ?

what version of E2 ?
where did it all go wrong ?
are you using HDMI cable or scart ?
where did you get up to from the flash instructions ?
usb or hard drive installation ?

[eivi]

Originally Posted by aftermath can you give a bit more information ? what version of E2 ? where did it all go wrong ? are you using HDMI cable or scart ? where did you get up to from the flash instructions ? usb or hard drive installation ?

several / finaly made it from SifTeam E2 image file /flashed it over nlb last version / I have hdmi / interesting - first 2 times hanged on showing green screen with errors but on 3rd went through and I finaly get into it /now will start from beginning / want to get it on hdd with multiboot / it seems my serial connection isnt working with putty - ctrl-z doesnt make connection / i tried with telnet and was partly successful but still not sure if I make right changes to setenv 2, 3 and 4

[aftermath]

First time you install E2 you need to have a scart connection and not HDMI thats why you maybe getting the green screen.

with the putty part it will take a few goes to get it right , you have to hit the ctrl - z at the correct time when it starts.

[arashkhaan]

Hi, all anybody can help me please I did all job on this command "tar xzf enigma2_cuberevo.tar.gz" how long I have to wait ? how do I know the job is done ? I'm installing "ddtklan_e2_b1.1.tar.gz"

[aftermath]

Originally Posted by arashkhaan Hi, all anybody can help me please I did all job on this command "tar xzf enigma2_cuberevo.tar.gz" how long I have to wait ? how do I know the job is done ? I'm installing "ddtklan_e2_b1.1.tar.gz"

can take about 45 mins before the curser appears, but dont do anything until it does.

[arashkhaan]

Originally Posted by aftermath can take about 45 mins before the curser appears, but dont do anything until it does.

I see the curser but no cuberevo or anything else is before the curser !!! but I see the the usb stick is flashing(blinking)