help and advice needed for xbox360

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • johnboy1974
    DK Veteran
    • Dec 2008
    • 3418

    #1

    help and advice needed for xbox360

    i have an xbox360 2006 model. the optical drive is flashed with iextreme 1.6 firmware. i have been having problems recently with rrod 3 lights. the motherboard is xclamped and has been reflown in the past. i was wondering if it could be possible to buy a new xbox360 basic model and transfer the optical drives over. the optical drive i have is a toshiba samsung model ts- h943. manufactured in september 2006. thanx in advance.
  • karlpowell
    Top Poster
    • Jan 2009
    • 189

    #2
    The optical drives are tired to the board , It can be done but you will have to get the key from the new drive and spoof it to the old .


    It would be easier to just flash the new one.

    Comment

    • johnboy1974
      DK Veteran
      • Dec 2008
      • 3418

      #3
      Originally posted by karlpowell
      The optical drives are tired to the board , It can be done but you will have to get the key from the new drive and spoof it to the old .


      It would be easier to just flash the new one.
      ok what kind of drive would be in a new xbox core system would that be the ben q drive, and would i need any special tools etc to do this although i know i would need jungle flasher.

      Comment

      • ezzda1
        Top Poster
        • Jul 2009
        • 172

        #4
        a new one will most likely have a lite-on 8 series v2 or a 9 series,
        hacking those involves cuting tracks and soldering, quite a hard job if you never soldered before,
        you might get lucky with a 8series v1 but its doubtful. either way make sure you spoof the new key to an old drive (make sure it works) before erasing the new drive.

        Comment

        Working...