eurovox max v "no signal" after new flash

[loncell]

i downloaded the new flash and flashed mine and my mums eurovox max v.i then started to scan but the "LEVEL" and "QUALITY" bars remain in the red , very low.i've checked the feed and its ok so i factory reset the boxes to 6952 my area and tried to scan again but still nothing.
only other thing is when its scanning the "CH NUM" at the top is blank (not sure what this is for) , is that right ?and in the main menu the "SYSTEM INFORMATION" its still showing "S/W ver 1.0 ST4 april 14th 2008" is that right ?.
to me it doesnt seem to be flashing correctly but on two boxes baffles me , , anyone help please.

also did there use to be a signal booster somewere in the menu ? i cant find that either.

[hawking1973]

ok loncell make sure you put cable in the right place i had the same prob you need to put cable in rf in look on back of box and its on the far left put the cable in there and do a scan .

[loncell]

well after another look at it and reflashed the pair i've managed to get me ow'd ladies box up and running ,,i scanned her's with signal at 84% happy days.but with mine its a different story , signal is 8% now and doesnt move an inch.

when i got to scan it bops around low signal in the red then every 4-6 seconds shoots into the green then back to red.after a lenghty scan it comes back with nothing..
will this be a busted tuner ? or could one be a clone and the other not ? and the flash has screwed a clone box ?.any help please pulling the skin off me bald head here !!.

[loncell]

sorry fella's for answering me own questions but here goes ;-
i reflashed the box with the older 28/04/2008 8% fix flash and the box scans fine for channels.only problem is i have manually enter the keys because as soon as i reflash with the newer FW the tuner problem arises its ugly head.
stupid it might be but is there a new flash with the 8% included or is it already in as part of the new flash ?.
thats more than likely why it worked up till i reflashed.

[jaydee]

After you downloaded the latest firmware did you then download your Channel list.

[loncell]

after 2 hours of searching i found the lastest FW with the 8% included :-


UFL_MAX_V_8%_01_12_08

works a treat on any box recently flashed and the signal strength is stuck on 8% .

[andjos]

Glad it wasnt just me that had problem, thought I was doing something wrong when updating. I ended up re loading the old 8% fix.
Do you have the link for the new 8% load for my eurovox.

[loncell]

i got it sent via email sorry.


follow up , just heard it will shortly be going up on the world famous toolbar but if you want me to up it to some external link say were as i've never done it tbh.

[hust1er]

got same problem and iv,e lashed loads

hi guys same prob here with one box and iv,e flashed 15 others with no probs. please let me know where i can find the 8% problem firmware.
Thanks in advance
H

[loncell]

here you go , latest EUROVOX MAX V FW with 8% fix included:-

RapidShare: Easy Filehosting

[andjos]

Many thanks. Will try at weekend

[ticky23]

Thnx 4 the link loncell. Was having the same problem,

[ashorty21]

thxs guy`s this has helped me no end

[SIRIPALA]

HI
I HAD THE SAME PROBLEM.I FLASHED MY EUROVOX MAX WITH LATEST FIRMWARE.
AFTER FLASHED IT SAYS NO (CHANNEL LIST FOUND)
WHERE CAN I DOWNLOAD THAT FILE.
HELP PLZ

[SIRIPALA]

HI

can you send me latest firmwhere link to flashed eurovox max -v i got 1.12.2008 firm ware after i flashed it says no channels found and cant go to menue.just black screen says no channel found.i think i missed some bits somewhere
help me plz