advice needed

[MR-T]

i have a blackbox 500s which is about 3 months old and never had a problem till the other day,the box would not turn off via the remote control so i just unplugged it at the mains and switched it back on again thats when the problem started,now it will not conect to the internet so i cannot update the keys have checked all cables and found no fault whatsoever with them have even tried to ping the box but to no avail.
i also have another blackbox 500s and it works perfectly any help would be gertefully appreciated as i am at my wits end with it,also i have the gemini 4.2 image and running cccam 2.09 on both boxes so me thinks its a hardware issue any suggestions ?

regards

MR-T

[2tone]

is that the image that bomb was taken out of if so i would check your mac there was a prob with this and the clones you could even try a new image m8 this is the things with clone boxs gemini want nothing to do with them well dream if you want to look at it that way

[MR-T]

thanks for the quick response but have tried various other images and still the same,the thing is it was working ok until i unplugged it from the main and also the other box has the same image and also running it on cccam 2.09 just the dam thing will not get an ip addy.

regards
MR-T

[2tone]

thanks for the quick response but have tried various other images and still the same,the thing is it was working ok until i unplugged it from the main and also the other box has the same image and also running it on cccam 2.09 just the dam thing will not get an ip addy.

regards
MR-T

there is some thing wrong with the ethernet port m8 have you had a look at how its set up in the net work settings on the box might also be pot luck that its gone how long have you had it

[MR-T]

i have checked out eveything i can think of against the other 2 boxes which have been done the very same way,even reset the router back to factory settings but to no avail, even uplugged the box the box from downstairs and still cannot ping it the box is only 3 months old.

[opsmonkey]

the blackbox is a cheap chinese copy.. it maybe that this indivdual box has not been made up to the standards of your others..

If you other 2 are identical and this one is faulty running the same IMG & EMU's.. i think you have answerd your own question..

PS - is that your dish...?

[MR-T]

yip i think its a hardware issue,looks like its a case of sending it back to china and waiting probably a couple of months for them to test it and get it back.
as for the dish i got it from another site wish it was mines

[alunfennell]

I have come across the Blackbox receiver (not a bad machine) but before powering it up I opening it & found a lot of metal chippings around the PCB some were magnetised to important BGA components and resistors, this will of course damage the receiver or stop it from functioning , so I suggest you open your receiver and see if any chippings are strone around the inside of your receiver touching off components and possably shorting out features on your receiver. (realy good clone when its up and running mind you)

Regards:
Alun

[MR-T]

thanks for the reply,but not gonna open the box up as it would void my warranty if the seal is tampered with,so hopefully i hear from them soon and give me an addy where to send it as its only 3 months old.

[opsmonkey]

thanks for the reply,but not gonna open the box up as it would void my warranty if the seal is tampered with,so hopefully i hear from them soon and give me an addy where to send it as its only 3 months old.

will take a long time and be expensive to post duff and receive fixed box fm china

[Curious123]

I have had two boxes from china and never noticed a seal of any kind.

[MR-T]

i guess this is a new thing they have started,and also would cost a pretty penny to send it back to china but anyway i have removed it and is now void.also cannot see anything wrong with the pc board underneath wish i knew what components that could be faulty which i could replace myself as they would only cost a couple of quid i could get them from maplins store,also remember my m8 telling me there was a site about the components to change something to do with the lan to be more stable when watching the dreambox on the pc anyone heard of this site ?

[opsmonkey]

id just cut my losses and sell it on fleabay as faulty.. some one will buy it

[mm009b]

my black box's eathernet connections fail now and then but its always down to router and modem sometimes it takes half hour to sort it
can you see yellow led in box when ethernet plugs in mate ?
also i would try flash it again mate don't give up you are getting plenty of suppor here cheer mate good luck

[MR-T]

thanks m8 for ur reply,yes i can see yellow led flashing when the erthernet cable is attached,i can get all fta channnels but it stumps me cause i know the box works ok or should i say it did until i unplugged it from the wall.
will try flashing it again with a couple of new images and let you know the outcome.