hi ive tried to reflash my box with new firmware 30.11.08 it said version 2.0 after download said successfull plugged it back in factory reset to my symbol rate and the level and quality is just from as low as 3 up to 80 odd and finding no channels my other box is fine what am i doing wrong should the version of been 2.1 im really pullimg me hair out sick of doing scans and nothing finding ive even tried manually putting the freuencies in from me other box and its still not finding anything ive put emm to enable help""""
-
-
If you have factory reset do a powerscan using the correct cable provider 6887 ex ntl (and c&w) and 6952 ex TW. Defo flashed the box with the correct firmware? -
hiya thanks for your reply when i go into system info it says april08 version 2 my symbol rate for n.. is 6887 and my other box is working fine that has kuro software,the signal is at 8 % when scan as finished no tp found grrrrComment
-
i have the same problem with my blue re-flashed and scanned set symbol rate still no tp, sorry not much help. good luckComment
-
connection
check your ariel connection m8 it could be that
sigpic
its the stuff we think we know that stops us all from learningComment
-
hiya i must be doing something wrong when im downloading or something my aerial is fine as im unpluggen one box to try they other before i start the scan the % is only at 8% and i think thats why its not finding anything when i start scan it,s pretty much jumping from low to green,ive even tried putting the frequencies in from what i have on me other box still not finding anything....when im downloading r u to press upload first 30.08.11 then bottom to download or the top download button its really knarking me of now as its probley something so simple if anyone can think of what im doing wong plz let me know ill try another download lata sick of doing scans..sorry its abit long just trying to explai what im doing.Comment
-
if they are both eurovoxes. you can upload channel file from working box and download it to the other box using firmware loaderComment
-
hiya how to do i do that,i dont want to knack the box up that is working,my other eurovox is a black slimeline model,is there a fix for the signal problem for eurovox 07 as i know the is for max v..thanks for your help..Comment
-
ALL YOU HAVE TO DO IS CONNECT THE WORKING BOX UP TO THE COMPUTER USE THE UPLOAD BUTTON ON THE ON THE UFL LOADER CLICK UPLOAD THEN CONNECT THE ONE THAT ISN'T WORKIN UP AND CLICK DOWNLOADComment
-
eurovox maxv still updating codes
Hey guys, hope all is ok. Am in the south of England and connection is NTL, i have had the messege updating codes for over a month now. i tried to flash it with tha UFL_MAX_V_5_12_08.exe and still have tha same problem. It is the black Euro vox Maxv please helpComment
-
think you need to start new thread to get your problem sorted.......anyway i upload the n.. for teeside channel dump onto my box last night got it from on thread on here dated 28.10.08 when box came on it came on bbc 1 just said no or bad signal did a factory reset still nothing.signal still at 8 % any advice really apreciate it as its doing my head in do ou think signal booster will work even though me other box is working ok..Comment
-
new need help
got eurovox ex5000 pvr same prob can you helpComment
-
have you got bad signal and have you updated to the new softwareComment
-
still need help
got the new software it works fine at my dads no problems
my internet works & ntl box works could it be a bad signal how can i tell
it`s killing meComment
Comment