Lost all satellite after installed AJ's SKY UK channel list

[Zizzo]

I installed AJ sky UK channel list on my sybox f3 but now I have lost all my satellite list, I have only one satellite which is AJ SKY UK, so what should I do??I don't have HOTBIRD OR ASTRA or any satellite...Any help I will appreciate to get back...

[nibblitz]

Manually add the other satellites you want to your satellite list, then blind scan them...

[intel]

Did you reboot the box after adding the new channel list?

[darcu5]

If you load a 28.2e only channel list then you will loose all your channels for the other sats, it overwrites the existing file. Either do as nibblitz says above and scan each sat you require or try a multisat channel list like this one http://www.digital-kaos.co.uk/forums...etting-309252/
personally I use to get a decent 28.2e channel list then just scan each sat and delete channels i never bothered with. If and when tp's use to change i would scan the new tp to keep the channels up to date.

[Zizzo]

Manually add the other satellites you want to your satellite list, then blind scan them...

Alright thank you for that but I have to know the frequency for each satellite right??Any help step by step I will be appreciate

[DW190]

Alright thank you for that but I have to know the frequency for each satellite right??Any help step by step I will be appreciate

Get the freqs from king o sats

[Zizzo]

Did you reboot the box after adding the new channel list?

Yes I did reboot the box...

[Zizzo]

Get the freqs from king o sats

Thank you for that...I will do it

[Zizzo]

If you load a 28.2e only channel list then you will loose all your channels for the other sats, it overwrites the existing file. Either do as nibblitz says above and scan each sat you require or try a multisat channel list like this one http://www.digital-kaos.co.uk/forums...etting-309252/
personally I use to get a decent 28.2e channel list then just scan each sat and delete channels i never bothered with. If and when tp's use to change i would scan the new tp to keep the channels up to date.

Thank you for that I will have look then I will be back with my results..

[Zizzo]

Ok I have done everything but when I scan the satellite am getting the same channels for 28.2 so what might be a problem here?? or am doing anything wrong?? Also I have tried to use http://www.digital-kaos.co.uk/forums...etting-309252/ but deleted everything on my skybox f3 so I think it's better if that thread get deleted...

[Zizzo]

I just need more help to get different satellite with different channels, like am missin Sky calcio and JS Sports 1-10 so need more help..Now I have only one satellite which is AJ's SKY UK.

[nibblitz]

Have you got a motorised dish?

[darcu5]

You would have to go into menu and select satellites, then if the sats you want to scan are in the list select them; if they are not in the list select to 'add' which will be a coloured button, probs blue or green.. type in 13e and name it hotbird, now save it, if you want to add 19e do the same again,
now go to satellite setup
on the top line are the sats.. scroll left or right to change accordingliy, then go down to the motor set up to set
lat & longitude (thats if it is a motorised dish) if it is disq switch you can see the option to set the ports down near the bottom.. you will need to set this up to work with all the sats you want to work so change the sats on the top line then set up the motor as usals, disq or whatever you use.. now go back into menu and choose single satellite scan, choose to scan 13e and choose to do a blind scan. The dish 'should' go to 13e and start scanning..

If you use disq switch i find it better to manually add a tp first then i can set up the ports correctly as it will show the signal strength jump up when i select the correct port

[Zizzo]

Have you got a motorised dish?

Yes I forgot to mention that I have motorised dish and before worked fine...so any setting??

[Zizzo]

You would have to go into menu and select satellites, then if the sats you want to scan are in the list select them; if they are not in the list select to 'add' which will be a coloured button, probs blue or green.. type in 13e and name it hotbird, now save it, if you want to add 19e do the same again,
now go to satellite setup
on the top line are the sats.. scroll left or right to change accordingliy, then go down to the motor set up to set
lat & longitude (thats if it is a motorised dish) if it is disq switch you can see the option to set the ports down near the bottom.. you will need to set this up to work with all the sats you want to work so change the sats on the top line then set up the motor as usals, disq or whatever you use.. now go back into menu and choose single satellite scan, choose to scan 13e and choose to do a blind scan. The dish 'should' go to 13e and start scanning..

If you use disq switch i find it better to manually add a tp first then i can set up the ports correctly as it will show the signal strength jump up when i select the correct port

Thank you for this, I think I didn't do all this, I did in wrong way that's why I was getting same channels, so I will try to do what you said then I will be back again, your instructions is straight away....