LTU & LT3.0 Download + Jungleflasher

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cunny
    V.I.P. Member
    • Jan 2009
    • 4915

    #1

    LTU & LT3.0 Download + Jungleflasher

    FW Pack

    Code:
    C4E***8217;s iXtreme LT Ultimate in association with Team Jungle & Team Xecuter
    ---------------------------------------
    
    Official release of the iXtreme LT Ultimate for Team Xecuter LTU PCB
    
    - Support for Liteon 0225, 0401, 1071, 1175, 1532, Hitachi 0500/0502
    
    - No need for firmware dump of source drive. Requires dvdkey and J-Runner data
    
    - Supports enhanced topology data if present for more accurate topology responses (Future ABGX support)
     
    - Requires new JF to support LTU board flashing process. Use 0800 dual layer disc in drive to enable reflashing/vendor mode once LTU is written to board
    
    This firware is uniquely written for the TX LTU board. It has all the features of LT 3.0 with the addition of the LTU features.
    The 1332 chip has been the most secure chip used in the 360 to date. Cudos to MTK/Liteon for their attempt.
    The movement of the dvdkey, AES routines and realtime firmware checks into the drive CPU was a nice touch.
    
    I would like to dedicate this release to fellow countryman and Commodore hacker Julian Assange and Wikileaks. Keep the bastards honest. 
    
    
    Thanks go to Team Jungle and all testers for their hard work and efforts in the development process. 
    Thanks also go to Team Xecuter for their support to this project.
    JungleFlasher

    Code:
    JungleFlasher 0.1.94(320) 
    ========================================
    
    Support for new Key verification process
    Vendor command support for DG-16D5S Drives 
    -xecuter X360USB Pro ***f/w update required***
    -xecuter X360USB Pro 2 ***f/w update required***
    Extra functions to utilise RGH extracts with LTU using T-X DG-16D5S replacement PCB
    
    Support for LT Plus 3.0
    -Hitachi 78, 79
    
    Support for LTU 1.2, using T-X replacement PCB
    -liteon DG-16D5S  1175, 1352
    -liteon DG-16D4S  0225, 0401, 1071 - lost f/w replacement, replaced with a T-X DG-16D5S replacement
    -hitachi DL10N 0500, 0502 - replaced with a DG5S
    
    Bug fix to SlimKey for bytes at 3f005, 3f006
    
    IO port enumeration for Win 8 using old school PCI bus scan
    -Using new portIO drive from schtrom with 32bit memory access
    Jrunner & Tut links to follow but if you have a clue you should be sound

    This is the PCB required TX Liteon DG-16D5S - Replacement PCB 1175+ - 360 Firmware - Xbox 360 - MTUK LTD

    Jrunner (From RMS) http://www.realmodscene.com/index.ph...&attach_id=385
    Code:
    286
    - Added support for LTU required files on "Extract files" function for use with JungleFlasher
    Attached Files
    Last edited by cunny; 31 January, 2013, 17:52.
    sigpic

    "Make it idiot proof and someone will make a better idiot."
  • cunny
    V.I.P. Member
    • Jan 2009
    • 4915

    #2
    In the jf manual an on tx forums

    Sent from my GT-I9300 using Tapatalk 2
    sigpic

    "Make it idiot proof and someone will make a better idiot."

    Comment

    • snaiperr
      Newbie
      • Feb 2013
      • 1

      #3
      this is realy LTU firmware? because i cant found anywhere to download thank u

      Comment

      • unique904
        Newbie
        • Feb 2013
        • 1

        #4
        is it possible to write to the new LTU pcb with dumps taken from the original drive the 16d4s

        Thanks

        Comment

        • cunny
          V.I.P. Member
          • Jan 2009
          • 4915

          #5
          Originally posted by unique904
          is it possible to write to the new LTU pcb with dumps taken from the original drive the 16d4s

          Thanks
          Try it as I no dumps to try

          Sent from my GT-I9300 using Tapatalk 2
          sigpic

          "Make it idiot proof and someone will make a better idiot."

          Comment

          • casper1690
            Top Poster +
            • Feb 2011
            • 213

            #6
            hi cunny. now the software is hear. do i now buy a ck3 kit as image a pm u before. also now use the software and use the guide in ur other tut. thanx and sorry for pm all time

            Comment

            • cunny
              V.I.P. Member
              • Jan 2009
              • 4915

              #7
              Originally posted by casper1690
              hi cunny. now the software is hear. do i now buy a ck3 kit as image a pm u before. also now use the software and use the guide in ur other tut. thanx and sorry for pm all time
              You will need

              DGX If you need to pull info off motherboard of 360.
              Replacement PCB (LTU)
              x360 USB v2

              Or take it someone who can do it for you as the above could be costly
              sigpic

              "Make it idiot proof and someone will make a better idiot."

              Comment

              • casper1690
                Top Poster +
                • Feb 2011
                • 213

                #8
                Ok al just pay 40 get it dne thanx. Then could u give me info on wether or not my multi dvd drive will do deul layer dvds. As did 1 in past but it unflashed my mates xbox I think

                Comment

                • cunny
                  V.I.P. Member
                  • Jan 2009
                  • 4915

                  #9
                  The hitachi will be more than 40. The pcb alone is 40. I co retrieval e about 20

                  Sent from my GT-I9300 using Tapatalk 2
                  sigpic

                  "Make it idiot proof and someone will make a better idiot."

                  Comment

                  • casper1690
                    Top Poster +
                    • Feb 2011
                    • 213

                    #10
                    Ok. Thanx. Will c if any1 can do it for me

                    Comment

                    • cunny
                      V.I.P. Member
                      • Jan 2009
                      • 4915

                      #11
                      Originally posted by casper1690
                      Ok. Thanx. Will c if any1 can do it for me
                      I can put you in touch with people.



                      http://team-xecuter.com/forums/showthread.php?t=99737
                      Last edited by cunny; 10 February, 2013, 11:08.
                      sigpic

                      "Make it idiot proof and someone will make a better idiot."

                      Comment

                      • casper1690
                        Top Poster +
                        • Feb 2011
                        • 213

                        #12
                        i am in scotland do u have a idea of price. p.s will i b able to do discs and from a external 500hdd

                        Comment

                        • antomic
                          Newbie
                          • Apr 2013
                          • 1

                          #13
                          Thank you for posting these files

                          Comment

                          • tecoloteuno
                            Banned
                            • Jan 2020
                            • 3

                            #14
                            Thank you. I am trying to flash an old lite on xbox 360 drive with 0800 fw for ripping a game my classic xbox cant read. Cant believe i lost the 0800 fws.

                            Comment

                            • tecoloteuno
                              Banned
                              • Jan 2020
                              • 3

                              #15
                              So I had to spam-post and wait several mins to download the fw pack for the 0800. I was able to download n older version of the JF i already have but not the fw. Rules are rules, but hey, if that file required a "higher level for VIP ppl" would have saved time for me and storage space for the forum.

                              Comment

                              Working...