Eurovox new No Signal issue's?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kiwi76
    Member
    • Dec 2008
    • 41

    #1

    Eurovox new No Signal issue's?

    Hi, my eurovox has started displaying no signal on alot of channels.. i.e all bbc channels, some music channels and some xx channels. the eurovox is fully up to date with firmware's etc etc to be on the safe side i cleared all data and did a power scan and it came up the same again... is anyone else getting the same problems? is Virmin up to something etc etc? i have a eurovox max v (non clone)

    Any help would be appreciated...
  • HiTeck
    V.I.P. Member
    • Oct 2008
    • 996

    #2
    On the channels that are causing the problem post back the signal strength, to see the signal strength press info twice, watch for fluctuation in the signal i.e 76% jumping to 80% or similar also compare the signal strength to other working channels and post back.

    Comment

    • kiwi76
      Member
      • Dec 2008
      • 41

      #3
      Hi Hi-tech, sos the late reply night shift worked!! i've looked at the signal on a few of those channels and they are as follows..

      Channels
      Kerang
      CBeebies
      XXX channel
      BBC Three

      All are stating the dreaded 8%... i have however got all the other channels working at about 68% - 79%.. i have found another 2 x bbc channel's (BBC one England + BBC 2 England) that work..

      I have done the 8% fix firmware update...

      Please help....

      Thanks in advance

      Comment

      • HiTeck
        V.I.P. Member
        • Oct 2008
        • 996

        #4
        Is the signal booster turned on in TV settings, have you also tried the normal max V firmware.

        Comment

        • kiwi76
          Member
          • Dec 2008
          • 41

          #5
          Finally fixed the issue i cleared the channel data-factory default-reloaded firmware then got the 8% channels sorted however i have lost setanta sports channels... got all other ppv channels..any idea's??

          Comment

          • camelv
            V.I.P. Member
            • Nov 2008
            • 1202

            #6
            Originally posted by kiwi76
            Finally fixed the issue i cleared the channel data-factory default-reloaded firmware then got the 8% channels sorted however i have lost setanta sports channels... got all other ppv channels..any idea's??

            fac reset again and try a scan or deep scan removing splitters if you have any m8.
            or if someone in your area has the channels you are missing ask them to go to each channel and press info twice and write down the freq then go to user installation and do a manual scan on the freq this should bring them back .
            Last edited by camelv; 7 April, 2009, 17:22.





            sigpic
            its the stuff we think we know that stops us all from learning

            Comment

            • fillyb1970
              Newbie
              • Oct 2008
              • 1

              #7
              eurovox

              i am having the same problems with pvr 5000 low signal anyone any ideas

              Comment

              • camelv
                V.I.P. Member
                • Nov 2008
                • 1202

                #8
                Originally posted by fillyb1970
                i am having the same problems with pvr 5000 low signal anyone any ideas
                have a read through this link m8.





                sigpic
                its the stuff we think we know that stops us all from learning

                Comment

                Working...