This guide has been submitted with thanks to its author HiTeck, I have changed/added to it with his permission. So all credit and thanks to him.
Eurovox Factory Default and Scanning Tutorial
Please before you get started check and double check that you have the cable feed pluged into your "RF IN" and not the ANT socket.
1; First of all you will need to know who your Symbol Rate, If you get this wrong you wont pick up any Transponders/Channels so download the list linked below before going any further. (if your on Ch0rus use 6875 as shown below for your Symbol Rate.)
SR List here
FACTORY DEFAULT:
POWER SCAN:
If after the power-scan you do not get all your channels try the above but in (installation) instead of selecting (User Installation) press OK on the **(Deep Scan)** and make sure you select the correct symbol rate!. This can take up-to 2 hours so be patient and happy viewing.
Eurovox Factory Default and Scanning Tutorial
Please before you get started check and double check that you have the cable feed pluged into your "RF IN" and not the ANT socket.
1; First of all you will need to know who your Symbol Rate, If you get this wrong you wont pick up any Transponders/Channels so download the list linked below before going any further. (if your on Ch0rus use 6875 as shown below for your Symbol Rate.)
SR List here
FACTORY DEFAULT:
POWER SCAN:
If after the power-scan you do not get all your channels try the above but in (installation) instead of selecting (User Installation) press OK on the **(Deep Scan)** and make sure you select the correct symbol rate!. This can take up-to 2 hours so be patient and happy viewing.