tune failed dream for dm 800

[the rock]

There are still some bugs in the software, which can cause this problem too.
This failure is already known to our development department and we are
currently working on a suitable solution.
As long as there is no updated release firmware image available, please
install this experimental image
to your box: this was sent to me buy dream to fix tune failed is this not for CLONE BOXES
http://www.dreamboxupdate.com/opendreambox/1.6/dm800/images/experimental-dm800_20100304.nfi

[the rock]

tune failed from dream

Further you can test the advanced configuration instead of the simple one.
Please test it by using the manual configuration. In the tuner configuration
set the config. of the tuner to "extended" (at the moment should be on
"simple"). Now you can choose which satellite to receive and then use for
these satellites this settings (Diseqc-mode 1.1, Diseqc
command transfer (AA), Diseqc repeats on 2 or 3, command or repeating sequence
may also once activate).

Once configured for the first satellite please select with the left-right
buttons of the remote control the next satellite you wish to receive and make
the same adjustment (just adpot the Diseqc-Port to AB etc.). Please do not use
the "exit"-button on the remote before all satellites
are configured correctly. Are all satellite configured, please press the OK
button on the remote to save the settings.