just unplug battery for few secounds...
Do not forget to use THANKS button...
RHD (UK) LEON 2012 1p / mk2
Recently updated the ECU using VCP.
03L 906 023 LG 9624 to -> 9968.
Got the file from online somewhere and now I'm running into issues with several control units. The remote center locking is not working, heater / fan is not working, windows have stopped working, parking sensors etc which were all fine before flashing the update using Vag Can Pro. I'll post the scans of the modules below from VCDS and can post the auto scan from VCP as well. The main thing it indicates to is no communication to some of the modules mainly BCM don't know if these need recoding. There was no way of backing up my old flash file frf before I flashed the new file which I can upload here if anyone wants to check it.
Any solutions anyone can provide would be appreciated. Also would flashing back down to 9624 help the issue? I got the file online so not sure if its for like another variant of the vag group like vw golf.
VCDS error scans below:
7318 - Body Control Module (Central Electric)
U0140 00 [047] - No Communications
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Date: 2023.02.12
Time: 02:23:27
Engine RPM: 1440.00 /min
Normed load value: 24.3 %
Vehicle speed: 0 km/h
Coolant temperature: 54 °C
Intake air temperature: 20 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 14.795 V
Unlearning counter according OBD: 40
Driver intention torque-TQI_DRIV_SUB: 0.00 Nm
Control Module temperature-TECU: 11 °C
7319 - Body Control Module (Central Electric)
U0140 00 [047] - No Communications
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Date: 2023.02.12
Time: 02:23:24
Engine RPM: 1576.25 /min
Normed load value: 2.7 %
Vehicle speed: 0 km/h
Coolant temperature: 54 °C
Intake air temperature: 20 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 14.795 V
Unlearning counter according OBD: 40
Driver intention torque-TQI_DRIV_SUB: 0.00 Nm
Control Module temperature-TECU: 10 °C
7455 - Door Control Module - Driver's Door
U0199 00 [047] - No Communications
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Date: 2023.02.12
Time: 02:23:23
Engine RPM: 1914.50 /min
Normed load value: 21.2 %
Vehicle speed: 0 km/h
Coolant temperature: 54 °C
Intake air temperature: 20 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 14.795 V
Unlearning counter according OBD: 40
Driver intention torque-TQI_DRIV_SUB: 0.00 Nm
Control Module temperature-TECU: 10 °C
11831 - Function Restricted due to Missing Message(s)
U1111 00 [047] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Date: 2023.02.12
Time: 02:23:23
Engine RPM: 1914.50 /min
Normed load value: 21.2 %
Vehicle speed: 0 km/h
Coolant temperature: 54 °C
Intake air temperature: 20 °C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 14.795 V
Unlearning counter according OBD: 40
Readiness: 0110 0000
Address 03: ABS Brakes (J104) Labels:. 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 BL HW: 1K0 907 379 BL
Component: ESP MK60EC1 H31 0152
Revision: 00H31001
Coding: 133B201209230001C80F04EB90190091350800
2 Faults Found:
02214 - Tire Pressure Warning
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 45
Time Indication: 0
Date: 2017.06.07
Time: 14:27:42
Freeze Frame:
Count: 0
Count: 2
Count: 12800
Count: 397
Count: 53504
Count: 65281
Count: 514
Count: 0
01314 - Engine Control Module
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 48
Time Indication: 0
Date: 2017.07.05
Time: 01:48:55
Freeze Frame:
Count: 0
Count: 14
Count: 4608
Count: 8194
Count: 44032
Count: 65280
Count: 1281
Count: 0
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 1K0-937-08x-09.clb
Part No SW: 5K0 937 087 R HW: 5K0 937 087 R
Component: BCM PQ35 H 021 0068
Revision: BE021001
Coding: 46180A3E8025B0C0420800809500890442457608627D816000 80C7000041
Subsystem 1 - Part No: 1P0 955 119 D Labels: 1KX-955-119.CLB
Component: Wischer 06071 26 0611
Coding: 00DB90
Subsystem 2 - Part No SW: 1P0 955 559 A HW: 1P0 955 559 A Labels: 1P0-955-559.CLB
Component: REGENLICHTSEN H04 0003
Coding: 02542E
Subsystem 3 - Part No: 1P0 951 171
Component: Innenraumuebe 010 4971
Coding: 000000
Subsystem 4 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
Coding: 000000
4 Faults Found:
01135 - Interior Monitoring Sensors
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 4
Fault Frequency: 7
Reset counter: 47
Time Indication: 0
Date: 2017.06.08
Time: 14:44:11
Freeze Frame:
Term 15 Off
Voltage: 12.40 V
OFF
ON
OFF
OFF
OFF
01314 - Engine Control Module
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 1
Reset counter: 48
Time Indication: 0
Date: 2017.07.05
Time: 01:48:56
Freeze Frame:
Term 15 On
Voltage: 12.20 V
ON
ON
ON
OFF
OFF
01336 - Company Data Bus for Comfort System
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 6
Fault Frequency: 21
Reset counter: 8
Time Indication: 0
Freeze Frame:
Term 15 On
Voltage: 12.20 V
ON
ON
ON
OFF
OFF
03678 - Coordinator for Start-Stop Operation
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 1
Reset counter: 48
Time Indication: 0
Date: 2017.07.05
Time: 01:48:55
Freeze Frame:
Term 15 On
Voltage: 12.20 V
ON
ON
ON
OFF
OFF
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 7N0-907-530-V2.clb
Part No SW: 7N0 907 530 S HW: 7N0 907 530 J
Component: J533 Gateway H43 1632
Revision: H43 Serial number: 130712F2001220
Coding: 350203
3 Faults Found:
01314 - Engine Control Module
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00110100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 48
Time Indication: 0
Date: 2017.07.05
Time: 01:48:55
00457 - Central Electronics Control Module / BCM (J519)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 8
Time Indication: 0
Date: 2017.07.05
Time: 01:48:56
01330 - Central Control Module for Central Convenience (J393)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 8
Time Indication: 0
Date: 2017.07.05
Time: 01:48:56
all ecus picsp.jpg
just unplug battery for few secounds...
Do not forget to use THANKS button...
Last edited by number7hd; 13th February, 2023 at 01:48 PM.
If my solution helped You - do not forget to THANKS !!!
968p58 (13th February, 2023)
wow very strange did that the first time for about 10 seconds and didn't do anything and now boom it works! Left it unplugged for longer after your suggestion and it seems to have returned back to normal. Thank you.
Bookmarks