VW Premium 3D cluster EEPROM VIN change

[flatron11]

Dear all,

I'm in a cluster swap in a 2008 Scirocco from a small red display cluster to a premium 3D cluster.
The immo is disabled in the ECU and in the cluster, but the VIN number isn't mach so I can't calibrate and code the ABS.
If I put back the original cluster everything is good, but with the new one I can't calibrate the brake pressure sensor and the other ones... So I need to change the VIN number in the cluster.

In VAG Dash editor there is a table reference where is the VIN number in the eeprom, but if I open the hex with an editor, it isn't the clear VIN in ASCII coding.
eeprom.jpg

It is possible to change the VIN with any hex editor, or I need VVDI to change it?

Thank you,
Best regards, Tomi

[vas100]

Vvdi uhds avdi

[H2Deetoo]

Only by OBD using a suitable tool.

[flatron11]

Thank you, I have read about it and these codes are encrypted, so yes, it needs a specified tool.