Freelander 2004 mileage correction with upa

**mario313** · 9th January, 2011, 09:42 AM

Use HC12(S) BDM adapter. I have original, but clone Xprog-m have too BDM adapter.

**calin_bm** · 9th January, 2011, 12:27 PM

correct me if i'm wrong,i think it's the same with the micronas adapter?

**dfi** · 9th January, 2011, 12:33 PM

Originally Posted by calin_bm

correct me if i'm wrong,i think it's the same with the micronas adapter?

Yes, it's the same adapter, but you only need it if processor is secured

**calin_bm** · 9th January, 2011, 12:56 PM

anyone worked with this metod?any pictures?

**antibisic** · 9th January, 2011, 02:37 PM

thanks for your reply

**bonux** · 2nd November, 2011, 08:56 PM

Hi, i also confirm that UPA-USB clone works with freelander secured mcu, you just need sorder it on bdm board. No need to remove needles also.

**Meat-Head** · 10th December, 2012, 08:48 PM

Originally Posted by drpeter

Don't have time now to look for UPA pins but here is schematic. I help you later when I have more time

Did you manage to find them, please?

Originally Posted by bonux

Hi, i also confirm that UPA-USB clone works with freelander secured mcu, you just need sorder it on bdm board. No need to remove needles also.

Cool, you got the info.

THIS IS A GENUINE JOB - NO ODOMETERS WILL BE INCORRECTED, need to swap out a faulty speedo head.

Does anybody know if plugging in a used speedo will wack out the milage in BCM?

THANKS

Meat (in a pannick)

**smartymarti** · 10th December, 2012, 09:52 PM

They don't sync with each other mr meaty head , so you'd have to incorrect vcm , but on a 2004 no one is gonna be concerned

**Meat-Head** · 11th December, 2012, 12:19 AM

Originally Posted by smartymarti

incorrect vcm , but on a 2004 no one is gonna be concerned

VCM?

It's a genuine job, i'll plug the 2nd hand set in tomorow see what it says

car is for sale, advertised as whatever.

Just if he new speedo is way out, need to set back to what it is - hear that Justy22 - set back not IN-corrected.

UPA setting? This is secured has does upa sort that?
What settings on xprogm?

Thanks

Meat

**PremierD** · 11th December, 2012, 12:25 AM

Your ****ed with upa meaty .. unless you bought the adaptor .. it MCU is bdm locked so need to be removed to read ..unless you have r260 or similar ..don't have Xprog so dont know about it

**Meat-Head** · 11th December, 2012, 12:28 AM

Originally Posted by PremierD

it MCU is bdm locked so need to be removed to read ..unless you have r260 or similar ..

Right, so your saying remove the MCU stick into upa adaptor - (china clone) no idea what they were off hand.

It's a fuel gauge fault - ign on, spins around like a roulette wheel.

Not confident it's more than just the motor, but looks like it a pig of a job to swap over.

Thanks.

**Music73** · 11th December, 2012, 12:57 AM

what year is meaty.. is it the early 2001 - 2004 or the 2004 - 2006..

**jarecki55** · 11th December, 2012, 01:04 AM

I make 3 x freelander belong 2 week time. I tray Xprog, UPA and R270. Every time after correction dash go dead, I don't know why but xprog and R270 made by china do errors by writing(verification ok) but dash don't wake up, or problem on fuel gauge. I make backup read flash and eprom, after few attempts dash back to live, but make my mad.
I looking for freelander solution

**Music73** · 11th December, 2012, 01:38 AM

Originally Posted by jarecki55

I make 3 x freelander belong 2 week time. I tray Xprog, UPA and R270. Every time after correction dash go dead, I don't know why but xprog and R270 made by china do errors by writing(verification ok) but dash don't wake up, or problem on fuel gauge. I make backup read flash and eprom, after few attempts dash back to live, but make my mad.
I looking for freelander solution

I have only done one of these, used a R260 clone (red 9s12) work first time with no errors or removing MCU, Just connected Via BDM Port.

Got mine from banny @ revtronic