Can you write more details, I mean good numbers srs unit ? 77960-SWA-?414-M4, which ? Y414, U414 or maybe other , it is important ...your file look like somebody clear before you or a little corrupt ...
Hi everyone,
I have try to repair airbag modul SRS by myself 77960-SWA-414-M4, i try to program the eeprom use CH341, maybe i insert the wrong firmware before i repair the modul my doorlock was can automatic locked on 25km/h & now the automatic door lock not working anymore i attached 2 firmware, 1st is my original crash & 2nd is reprogram firmware (still crash). Kindly somebody have the correct firmware for my car, please. Thanks
Can you write more details, I mean good numbers srs unit ? 77960-SWA-?414-M4, which ? Y414, U414 or maybe other , it is important ...your file look like somebody clear before you or a little corrupt ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
Erwinjuliant (31st August, 2023)
my SRS ID no is 77960-SWA-U414-M4, thanks in advance brother
Check this and report, but I think hardware problem ...
You use srs units files at your own risk. I am not responsible for any damages. Don't ask about passes, one file=one pass.
If I helped, please, use magic buttons reputation+thanks.
Best regards.
Dragon
Erwinjuliant (31st August, 2023)
Ok noted & thanks brother, i appreciate you help us
thanks for sPM the pass to me
Last edited by Erwinjuliant; 21st July, 2023 at 09:31 AM.
Hi Mr. Dragon yes you're right, my hardware problem. i already read & write the eeprom use a couple firmware, but the result is still no communication. When i check current at OBD2 Port i get result not normal (CAN H=2.35V & CAN L=2.2V), but when i take off the SRS modul the current is normal (CAN H=2.65V & CAN L=2.35V). possibility problem at IC driver.
Bookmarks