Peugeot 307 1.6 NFU BSI replaced

[Andr33iy98]

HI,
I've made IMMO OFF on BSI to put any BSI and start the car, but with original BSI it does not roll up/down front windows.
With donor BSI, windows works, but the car does not lock/unlock anymore.
What is wrong ? ORIGINAL BSI is from 2001, donor is from 2003, same eeprom from what I have read.
I've put another BSI from 2005 and same problem, also AC does not work with any of BSI.

[pawl]

you need to make a configuration, preferably diagbox

[Andr33iy98]

but ecu is virginised, I can use any BSI. Do I need pin code ? Pin code is stored in BSI ?

[MrDerv]

BSI will need to be configured with Diagbox, especially if its virginised, BSI will need to know what is installed on the car before those functions work.

[pawl]

you need a pin code , stored in the bsi

[Meat-Head]

In settings there might be “electric windows on or off”

must be immo off in ecu

[Andr33iy98]

I"ve done immo off in ecu already. But lexia does not connect to engine anymore, stupid .

[Andr33iy98]

Only way to read pin from BSI is to work on "bench" right ? I can start the car with any BSI.