VW Golf Im*o help

[eliotroyano]

Hi friends. Please anyone can help to im*o off the ECU #06A906018ES 0261206411 Bosch Motronic M5.9.2 with im*o chip 24C02 of a 2000 MK4 VW Golf with 2.0L AEG engine???. I attach here the data of the 24C02 chip.
Thanks in advance for your help.

[segal75]

Hi

try this and give answer.
probably car will start, but diag. tool will show you
"eeprom error". check

regards
segal75

[eliotroyano]

Hi

try this and give answer.
probably car will start, but diag. tool will show you
"eeprom error". check

regards
segal75

Thanks a lot, I will try it and let you know.

[eliotroyano]

Hi

try this and give answer.
probably car will start, but diag. tool will show you
"eeprom error". check

regards
segal75

Friend a question, how can I test if the immo off file is ok without the car???? I do not have the car right now to test it. Do you think that testing the ECU on bench, the "engine blocked by immobilizer" error will disapear???

[umoussa]

This file is 100% okay and will work

[eliotroyano]

This file is 100% okay and will work

Friend do you mean the file posted by segal75????

[umoussa]

yes

It's correct

[eliotroyano]

yes

It's correct

OK!!!! THANKS A LOT!!!!!

[gizmo666]

i can also tell at this should work

[eliotroyano]

Great, thanks.

[eliotroyano]

You are right it work!!!!!!!!!!!!!!!!

[eliotroyano]

Well thanks a lot friends and sorry to ask you so much. After test it several times all error has gone and it is working quite good. Thanks a lot!!!!!!

[eliotroyano]

Hi again friends. Sorry to bother you so much but I have a doubt. I have using the car almost a week and I admit that is running normally. To be safe I scanned it again with VagCom and this is what I got:

VAG-COM Version: Release 311.2-N
Chassis Type: 1J - VW G/J/B Mk4
Scan: 01,02,03,08,15,16,17,19,22,29,35,36,37,39,46,47,55 ,56,57,75,76

Address 01 -------------------------------------------------------
Controller: 06A 906 018 JJ
Component: 2.0L R4/2V MOTR HS V01
Coding: 00031
Shop #: WSC 00066
1 Faults Found:
16989 - Internal Control Module: ROM Error
P0605 - 35-00 - -
Readiness: N/A

Address 03 -------------------------------------------------------
Controller: 1C0 907 379 J
Component: ABS FRONT MK60 0103
Coding: 0001025
Shop #: WSC 01317
1 Fault Found:
01314 - Engine Control Module
004 - No Signal/Communication

Skipping Address 15-Airbags

Address 17 -------------------------------------------------------
Controller: 1J0 920 826 A
Component: KOMBI+WEGFAHRS. RB8 V11
Coding: 05102
Shop #: WSC 00000
WVWZZZ1JZ2W420330 VWZ6Z0A4031013
1 Fault Found:
01177 - Engine Control Unit
64-10 - Not Currently Testable - Intermittent

Address 19 -------------------------------------------------------
Controller: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 01317
No fault code found.

Address 46 -------------------------------------------------------
Controller: 1C0 959 799 B
Component: 1C Komfortger?t HLO 0003
Coding: 00259
Shop #: WSC 01317
No fault code found.

End -------------------------------------------------------

Sorry about the old VagCom but is what I have right now. I know you tell me about the ROM error, but do you think that the ABS module and Cluster communication issues, could be related to the im*o disable?

The dash is working normal and I notice I got a little more travel in brake pedal, but in general are working good.

Some tips and advice will be great. Anyway the car is running good but I will to know a little more info about that errors, the immo disable can generate that issues?

Thanks a lot again for your help.

[oldguynotie]

i want to kill my immo 3 on a golf 2002