2016 Kubota M6-131 cluster hours correction

[Dashboard]

2016 Kubota M6-131 cluster with 93C66. It has 6,100 Hours and has to be 3,100 H.

[MrHenrick]

Here is your file

[clusters]

Here, with no password

[Dashboard]

Thanks for both of you, but unfortunately the file is not good the cluster shows E-Mem instead of correct odometer. Any idea?

[clusters]

Check eeprom orientation and soldering.

[Dashboard]

Maybe there is a checksum problem? Orientation and soldering of eeprom is good. With original file shows properly the hours. Any help would be appreciated.

[paulocallaghan]

im having the same E MEM message when i adjust useing orange calcs , did u sort it out

[hoangtu]

Maybe there is a checksum problem? Orientation and soldering of eeprom is good. With original file shows properly the hours. Any help would be appreciated.

cluster do not have cs! algo yaraki! file form Cluster work ok! i have more 300pcs maken!

[karolturbo]

Hi, I got the same problem with error memory, kubota m40xx 93c66, I found it: 1st and 2nd lines in eeprom must correlate with 8th line. Can somebody calculate it? editing only 2 first lines change hours but w/o editing 8th line still will be error

[Diagcar1]

Hi, I got the same problem with error memory, kubota m40xx 93c66, I found it: 1st and 2nd lines in eeprom must correlate with 8th line. Can somebody calculate it? editing only 2 first lines change hours but w/o editing 8th line still will be error

Posting your file could help.

[karolturbo]

Thanks for answer, probably I solved that problem, on bench all is ok, tomorrow I'll test it in tactor. If somebody got this problem, try to put it in 8th line 00 00 14 00 00 00 14 00 00 00 00 00 00 00 01 00