Need key code for nissan qashqai uk

[AAKEYS]

hi , i tried to buy the key code for a nissan qashqai 2008 UK BUT the supplier been unable to get it .
i have the vin and reg no : NV08KFR
VIN : SJNFCAJ10U1246209

[rapidlocksmiths]

Lishi NSN14 pick and decoder
lishi NSN14 direct reader

both will allow you to get the key cuts or most suppliers can get the code like 3d group etc

personally i pick and decode the lock which is quick and acurate

[AAKEYS]

Lishi NSN14 pick and decoder
lishi NSN14 direct reader

both will allow you to get the key cuts or most suppliers can get the code like 3d group etc

personally i pick and decode the lock which is quick and acurate

i have ordered from 3d BUT the supplier been unable to get it .
lishi ...it-s 2 missing wafers from the door to ignition as the key its a semi-smart ... and the lishi what i got it-s v2 ...

[rapidlocksmiths]

you can use software like instacode to find the missing 2 cuts , it will be 1 of 4 keys as only 4 possible combinations in 1st 2 positions 1-2; 2-1; 2-3; 3-2.

though as semi smart key i suspect you mean the intelligent key with turn knob on ignition , if so you will find the ignition does not contain all 10 cuts in fact often have just 1 wafer in them , i suspect you will be able to do this without finding the missing cuts with the pin code .

once you enter the pin the steering lock will release you will be able to turn on the ignition to program the transponder , this has been covered on dk many times in past , all you had to do was use the search function

[AAKEYS]

you can use software like instacode to find the missing 2 cuts , it will be 1 of 4 keys as only 4 possible combinations in 1st 2 positions 1-2; 2-1; 2-3; 3-2.

though as semi smart key i suspect you mean the intelligent key with turn knob on ignition , if so you will find the ignition does not contain all 10 cuts in fact often have just 1 wafer in them , i suspect you will be able to do this without finding the missing cuts with the pin code .


once you enter the pin the steering lock will release you will be able to turn on the ignition to program the transponder , this has been covered on dk many times in past , all you had to do was use the search function

i done thank you 1st time decode with lishi and cut 1-2 and good to go !!!

[gttuning]

I can get key cut for nissans ..

Sent from my SM-G965F using Tapatalk