Upload mpc, and i try erase code faut.
Hi all.
Have a renault master horse box with a P062F. no other dtc's at the moment. Vehile is starting and running fine with no issues. Just have the engine management light on and this dtc.
Can someone possibly check the eeprom data for errors for me.
Especially the checksums i possible.
I have attached the original EEprom data.
Thanks in advance.
Upload mpc, and i try erase code faut.
Hi,
sorry for the delay. I went through a few programmer's before I could read the flash.
What I am finding weird is the ecu set up.
I have an MPC562
M58BW016 FLASH
95320 EEPROM
But ktag etc list's a 95640 eeprom for this ecu.
Please check the file and let me know if it looks correct, or as you say, the dtc can be removed.
Best regards
Mike
Here you go eeprom cs repair
Hi, Please can you check the file again.
The van had an issue with fuel hand primer pump and the fuel ran back to the tank, when I tried the ecu file all faults were clear, However I couldn't get it started. The van was starting and running before but with the eeprom fault.
I have had time now to test the vehicle, I used another ecu and the vehicle starts.
There must be something still wrong with the file.
Thanks in advance.
Bookmarks