Transfer IMMO Med17.5.5

[ic3ek]

Hello colleagues.

I need your help.

I have a VW Tiguan and I need to replace the ECU in it, the old ECU refused to cooperate, but luckily I managed to read it.

I need to transfer immo-data from the old to the new ECU, and I need the PIN for the new one. I know the PIN for the old ECU, read from dashboard.

My system MED17.5.5. / TC1766

Can I ask you for help.
All files in atachments.

[Ninjor s]

Cześć koledzy.

Potrzebuję twojej pomocy.

Posiadam VW Tiguan i muszę w nim wymienić ECU, stary ECU odmówił współpracy, ale na szczęście udało mi się go odczytać.

Muszę przenieść dane immo ze starego do nowego ECU i potrzebuję PIN-u do nowego. Znam PIN do starego ECU.

System to MED17.5.5. / TC1766

Czy mogę prosić o pomoc, wszystkie pliki poniżej.

1-read the rules
2-inglish only
3-we need your help too
4-thank you.

[ic3ek]

I'am realy sorry i post my qestions for bad launguage.


I correct my post.


Now I am waiting for your help

[richard27]

Merhaba meslektaşlarım.

Yardımınıza ihtiyacınız var.

Bir VW Tiguan'ım var ve İçindeki ECU'yu değiştirmem gerekiyor, eski ECU işbirliği yapmayı reddetti ama şans eserini çalıştırmayı başardım.

İmmo koşulları eski ECU'dan yeni ECU'ya aktarmam gerekiyor ve yenisinin PIN'ine ihtiyacım var. Eski ECU'nun PIN kodunu biliyorum, kontrol panelinden okudum.

Sistemim MED17.5.5. / TC1766

Sizden yardım alabilir miyim?
Tüm dosyalar eklerdedir.

Here is your new ecu information

[Termo11]

How you got old ecu to communicate? I need to read out flash and pin code but can't communicate with it...

[ic3ek]

Here is your new ecu information

Thank you for this information

But, I still have a problem. With IMMO4 it is impossible to adapt the ECU in the car.
Maybe Online will be able to adopt, although I think that IMMO4 must be VIRGIN then, it won't work without it.

I turned off IMMO in the ECU and the car starts correctly

The problem is with ABS and BCM does not communicate properly with the ECU, Incorrect VIN in the ECU.

Could I ask for the VIN and IMMO to be transferred to the new ECU?

How you got old ecu to communicate? I need to read out flash and pin code but can't communicate with it...

Hi.My ECU is dead. It doesn't work properly in the car.


But I read it on the table.

Scanmatic + PCM put the TC1766 into bootloader mode without any problems, and then it was read only.

[Termo11]

Just to be clear. Is it possible to adopt used (donar) ecu without original ecu flash and eeprom data or new ecu only? Original is dead can't reed even through a boot mode...
All I got is a original eeprom data from original instrument cluster. If yes do I need odis engineering?

[jokir]

Test and report

[ic3ek]

Żeby było jasne. Czy możliwe jest przyjęcie używanego (donarowego) ecu bez oryginalnej pamięci flash ecu i danych eeprom lub tylko nowego ecu? Oryginał nie działa, nawet w trybie rozruchu...
Jedyne, co mam, to oryginalne dane eeprom z oryginalnego zestawu wskaźników. Jeśli tak, czy potrzebuję inżynierii odis?

Hi.

You cannot rewrite the EEPROM directly, the processor contains OTP.

You can change all CS/MAC/VIN values ​​in the new ECU and the car should start.

ODIS won't help, only ONLINE coding.

It's easier to turn off IMMO in EE, then the car will start.

Przetestuj i zgłoś

I'll try to test it today and I'll let you know.

Thank you very much

[Termo11]

Odis can not do online programming? What soft can do? Thanks

[kuebk]

Just to be clear. Is it possible to adopt used (donar) ecu without original ecu flash and eeprom data or new ecu only? Original is dead can't reed even through a boot mode...
All I got is a original eeprom data from original instrument cluster. If yes do I need odis engineering?

If you got decoded data from original cluster then this data can be used to restore immo in donor ECU.