Abarth 595 mileage please 95160

[DeanRom]

Fiat Abarth 595
Bosch ME7.9.10 ST10F275
EEPROM=ST95160

Now mileage is 90180km
I want 87600km.
Please someone Help me ! Thanks

[Zdenek11]

There are 86 650 km in your file

[DeanRom]

Hi. my bin file is already 86650km? I didn't check the dashboard. . my customer say to me that [He want to change mileage 90180km to 87600km] or I might be wrong. maybe my customer say to me that [ He want to change mileage 87600km to 90180km]?? If you could . Could you chante this 86650km bin to 901800km? Thanks!!

addres 0x02 = CD 38 0D = 0D 38 CD = 866509 = 86650.9km Is this calculation correct?

[DeanRom]

When I checked the Dash, it was correct at 90180km.

[jomberykaso]

Your file has 86650 kms, here it is with 90180 kms.

[DeanRom]

Thank you very much jomberykaso!
my bin file is read from
ST95160 in Bosch ECU.


addres 0x02 = CD 38 0D = 0D 38 CD = 866509 = 86650.9km


but when I change Digital Dash.
mileage show 111962km.
Which has priority: ECU or Dash?I haven't taken apart Dash yet.Does Dash have an eeprom?Also, do I need to change that eeprom as well?

[jomberykaso]

if you need to put 90180 kms, you mus edit dash + ecu.

Did you try my file?

[DeanRom]

Thank you for your reply.


I haven't tried Dash display yet.


This is a request from my customer.
Since he lives far away, I am shipping the meter and ECU to him.


Dash's eeprom is 111962km
ECU eeprom is 90180km (in bin file is addres 0x02 = CD 38 0D = 866509 = 86650.9km)
I was able to confirm the above.


Originally, in the case of 90180km, it should be 0x20 = A8 C2 0D, but
Dash shows 98180km at 0x20 CD 38 0D.


Do you know the cause of this?


Next time I receive Dash, I will change the eeprom in Dash and report it to you.


Thank you.

[jomberykaso]

Friend, test my file, it has mileage and checksum edited and post dash file here.

[perukeyservice]

friend DeanRom not be stubborn write the file of jomberykaso test and report simple

[perukeyservice]

the life are numbers and only lost the time to discover your destiny

[DeanRom]

Thank you for your advice.


The Dash and ECU have already been returned to the customer.
The reason was that I didn't think I could do it.


The customer is also planning to send the Dash and ECU to me in a few days.


When I receive it, I will write the file I received from jomberykaso.


And I will report to you all.


Thank you