Hello everyone,
I have a quick question
I just got Dreambox DM800 HD and I don't know how to set up?
I've Disecq 1.2 motor
Location
Lat: 51:36:34N (51.60945)
Lon: 0:08:58W (-0.14957)
The question is:
How to set-up the dish positions manually?
Hello everyone,
I have a quick question
I just got Dreambox DM800 HD and I don't know how to set up?
I've Disecq 1.2 motor
Location
Lat: 51:36:34N (51.60945)
Lon: 0:08:58W (-0.14957)
The question is:
How to set-up the dish positions manually?
can anyone offer advice or point me in the right direction we live in a new build so we can not have cable as the they will not be putting this in place, so i can only have **y my questionis is what dish do i need and box can someone explain why is a dreambox sought after should my dish be motorised, if so what box do i need to buy to go with it and how do i set one up as i have been on google finding it very hard to digest !! help help please!! gary
great guide but when i change the sat position it picks up some and not others is there a way to fine tune each sat and store the position
thanx for the information . very usefyl
many thanks
Technomate 6800 HD/DM800 HD PVR
1.1 metre Dish
Darkmotor
SuperSat
http://www.youtube.com/watch?v=kyFyAqLtHq8
http://www.digital-kaos.co.uk/forums...0192-supersat/
Thank you very much indeed for the info Westkill
Before everything, sorry for my poor English!
Recently I replaced my old Humax5400 receiver with DM800 hd
My Dish is motorized, I mean in case I'm watching NileSat (7 deg W) position (say 1),
and want to watch some channels from Amos satellite
I move the Dish using an actuator and separate positioner (SuperJack EZ Track II)
where every satellite has it's programmed position. (say 2)
My dish size 1.8 m, it has one (single) LNB which is connected directly to the receiver.
My Dish, It hasn't DiSEqC motor.
I found the difference in using Humax and DreamBox is very wide in everything.
My new DreamBox 800 furnished already with software Gemini Project 2
Available programmed satellites are:
Atlantic Bird / NileSat 7 deg W,
Hotbird 13 deg E,
Astra 19. deg E
and ArabSat 26 deg E
My Dreambox 800 not programmed for other satellites such as Amos, Sirius,..etc.
I understand that your above mentioned explanation will help me too much.
But I'm hesitated to do any change without consulting You!
Your help will be too much appreciated.
Please do one example for me such as;
how to add Amos satellite (4 deg W) for example ch2 and ch10.
Thanks in advance
Last edited by abuahmed; 28th June, 2011 at 11:08 PM. Reason: 4th correction
Hi there
I would be glad if someone could help me with the multi sat configuration for my Dreambox DM800. I followed the step by step but I'm geting confused on the latitude/longitude part. Since multimap is now bing maps is not showing the lat/lon as described so the results that I've got from my postcode are:
51.3179580867291 -0.578015372157097
What are the numbers that I need to input on the dreambox? And is North/South - East/West???
I know the dish works as I have a technomate 5400 and it works fine but I wanted an HD one so i bought the dreambox.
But now all i've got from the dreambox is Tune failed. I tworked once when I selected 28.2 Astra (this was the satellite that the dish was pointing to when I was last using the technomate) but I tried to move to other satellites and all I've got is the Tune Failed message and now even the 28.2 Astra is giving me this message. It must be the lat/lon is wrong.
Those are the coordinates that I put on the box:
Longitude: 000.578 West
Latitude: 051.317 North
What am I doing wrong??
Thanks for the help!
when set up as in post 1, when you change over from say 4.8 bouquet to another sat in the bouquet does the dreambox move the motorised dish ?
Last edited by andy91; 22nd September, 2011 at 01:41 PM. Reason: added usals pic
andy when ive put the long an lat in how do i scan sats mate ?
if you don't have chanelles of course you have to scan otherwise you don't have to, just store a position.
i know about scanning for channels, sorry for being vague, my box wont move the dish so i can get it to scan for channels on set sats, ive started a thread to help me on this, thanks guys.
Bookmarks