send u dump
send u dump
the pcb kenwood is sda scl
see pcb in nyo4
Hi all
I had same problem, read L04 tssop onboard and posted dump. Nobody was able to find the code.
I find the solution here:FixYa.com - Customer Support, Products Repair, Manuals & Troubleshooting on Any Product
You need the remote control for that.
Worked perfect for me.
Cheers
OK so here we are...I broke one pin when try to solder wires to read it via seeprog...in future beter idea will be try to read it in circuit..
I will keep cd drive and output ampl..all other down to trash...
As I see nobody have clean solution..this yust means we dont have time to solve it or need more practice
regards and thanks all who try to help !!!
he had to change the eeprom 24c04 and all will be fine
that's a shame
well my friend I still can do that..IF somebody have dump with code disabled...I can put in ordinary smd 24c04 and solder it there..but as I can see in past few days nobody have that solution.....
this is ordinary cd/radio not some fancy Alpine so probably nobody engage more eforts in solving this typee of radios..but IF you think theeree is solution please post it here so we all can learn
Regards !
LEAVE ME A CAN OF TIME OK FRIEND
Here m8:
Check this out:http://www.digital-kaos.co.uk/forums...mp5028-172173/
on the end of that thread i posted dumps, with and without code. Try to program L04 with my "noncode" dump.
Also there was little change in mainboard chip. Just look at it.
Hope that will help.
need code KDC W5141
Bookmarks