Hi
please help with crash reset for airbag mondeo
Bosch 0285010157 eprom 95160
7S7T 14B056 AC 670003481701
Hi
please help with crash reset for airbag mondeo
Bosch 0285010157 eprom 95160
7S7T 14B056 AC 670003481701
The first file was ok after i erased the errors.Thanks
Hi,
I need to repair this dump
I have repaired the dump, I put the unit on car, I clear all errors, and all goes Ok, but when turn off and on again the car, the airbag light turns on again, and in the diag shows A 1 A 3 7
....
Anyone knows how to solve?
I post the foto of the unit, the bad dump and the dump repaired by me.
Br
Mike
Last edited by eng_mike; 27th April, 2010 at 12:24 AM.
After a long time waiting a time to see what goes wrong, the costumer send to me the car,,, I see all, and all the things goes OK.
But when Disconect the car and conect again, the airbag turns on!!!
So I take the car to FORD Assistant, and they reset the error with the DIAG and solve the problem,
Many thanks.
Br
Eng_Mike
i have a crash dump from mondeo 7S7T14B056AC. can u clear it for me? thanks
regards,
geo
the dump was writed. i put on the car but the indicator is still on. the bosch kts diagnose no read errors
today i was to ford dealer and all errors was reset. the airbag led indicator is off now. all its ok. thx for help
Last edited by auto_geo; 5th July, 2010 at 05:36 PM.
Hi all
Please help how to clear craash data this Airbag unit
Thanks
Best regards:
Krisz
Give it a try and report back.
As it's done from virgin file probably no erasing of DTC shouldn't be needed.
Br
alclot (18th September, 2019)
ernesto1670 (28th December, 2015)
Hi
Thanks morfej,juozas10
airbag lamp is off.
here is good dump, cleared diagnostic tester and work...
Thanks
alladdin205 (3rd October, 2021), ernesto1670 (28th December, 2015), Jashmine1983 (29th December, 2015), km666 (7th April, 2020), looking77 (18th September, 2016), pepeoi (7th December, 2015), waldi1979 (8th May, 2013)
Bookmarks