Hy all! I need a pin for octavia 2 with simos ecu.
here is the dumps from ecu (93c86). 8 or 16 bit
THX
Hy all! I need a pin for octavia 2 with simos ecu.
here is the dumps from ecu (93c86). 8 or 16 bit
THX
Last edited by lordcroft; 9th July, 2010 at 09:50 PM.
M93C86W-x8-Orig.zip = 45527
M93C86W-x16-Orig.zip = 55217
look this
ECU Commander Studio?
Hand in Hand to Protect our Efforts - Stop Hunting Our Work
>>>>>EBAY SELLERS<<<<<
I'm not Sharing Passwords!
Do not argue with an idiot. He will drag you down to his level and beat you with experience
Hi , can sameone help with immo off
skoda fabia 047906033j
Simos 3PB SJ035
Thanks in advance
Hi
car:
skoda 1.4
ecu:
047 906 033 E,
SIEMENS 5WP44202 10
Benzin Simos 3PA
need immo off, I have an important question, need I to read/write as 8 or 16 bits (93c76) ??
thanks
dadal (26th July, 2017)
Thank you Electrones,
Thanks + Rep are added for you
siemens simos ECU"s must be always read/write as 16 bits ??
Hello All,
I have a Skoda Fabia 1.4 MPI with 047906033C Siemens ECU. I think when I made a throttle valve adaptation after cleaning, the damn Chinese VAG-COM 409.1 adapter cable caused some problem in the ECU SW.
Now the car stalls, there is a lumpy idle and when accelerating the engine is jerking and have error codes appearing.
I bought a used ECU, but I'm not able to read out the EEPROM content nor of the original, nor of the spare ECU.
I was able to read out the PIN code of the instrument cluster (which is the same PIN as the original ECU) with VAG K+CAN Commander.
Please give me a hand and give some advice what HW and SW needed to download the EEPROM content of the spare ECU.
Or how can I re-program/reset the original ECU?
I have:
- VCDS HEX V2 18.9.0
- VAG K+CAN Commander 3.6
- VAG-COM 409.1
Thanks!
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
Hello,
I done adaptation several times since the failure with a VCDS 18.9 HEX V2 cable.
Problem is still exist, so adaptation does not help.
I think something is messed up in the ECU flash or EEPROM.
Last edited by kiszka; 12th August, 2019 at 10:26 AM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
banalac (12th August, 2019)
Ok, thanks for the clarification. Do you know what kind of SW, method/procedure should I follow to get the things right?
Bookmarks