Manual update firmware DM 500HD via mini-usb
Upgrading the software of DM 500HD is like the rest of Dreams via RS232, but the mini-USB port.
Items required:
1) mini-usb male to male USB
2) Universal DreamUP 1.3.3.5 Download from Below ....
Process:
1)Unplugged the Dream 500HD
2)We connect the cable for its part mini-usb port "Service" of the Dream 500HD and the USB to a USB port on your PC.
3)Just plug it in, the PC will detect new hardware connected to the system:
4)The PC will ask the driver for this new component. Download from below
5)Open the Windows Device Manager, and you will see the new hardware installed, will appear as COM port (even a USB cable). In the following example, is recognized as the cable into the port COM4.
6)We opened the universal DreamUP 1.3.3.5 (for example) and select the update COM port (like any other model of Dreambox). At this point, we choose the COM port that we appeared in the previous step (COM4 in this example).
7)Press the Connect button the DreamUP universal and we can turn
the Dream 500HD to start loading new firmware.
Last edited by alunfennell; 19th October, 2010 at 02:50 PM.
Haa alunfennell,
When I tray to install the driver voor my DB500hd in Windows XP it does not reconise it because it is a .ipk fille.
And windows only reconise .inf fille. How do I solve this problem.
Greetz,
MD
Reffer to this thread every thing updated
http://www.digital-kaos.co.uk/forums...m500hd-158367/
**The Worlds Best Interactive F1 Strategy Game**
I got a bad image and I presume this will sort my trouble out ?
at the very top of this page you will see downloads (click on that to go to the downloads section ) if you mean how do you download the attached files in aluns first post just click on them.
i love it when a dreambox comes together.
what is the best way to record from dreambox 500hd please?
i have been trying with my sata icybox hard disk but is saying mount failed all the time
Thanks
Kevin
HI
when updating DM500hd with filler you should always have network cable attached to avoid bricking box. please connect TWO cables when flashing...
Key
I'll hope this works on my friends "compatible" Dreambox 500HD - thanks in advanced
It didn't work - I connected through COM4 - turned on the 500HD (compatible) - and a Flashload was transferred to the box - but ... then the system just hang, saying: waiting for acknowledgement - and absolutely nothing happened. Has anybody an idea how to completely reset the box?
Last edited by woodbum; 7th July, 2011 at 07:29 AM.
hi guys and gals just got muself a clone dm500hd with ferrari card did online update and once complete rebooted and now fans does not spin but pwr's on with no audio or video. thanks in advance mark
does anyone know how much time is needed to flash via network the dm500hd?
hello, i looking for a new software via usb for dream box dm 500 s and new cccam fig via usb , tanks everybody.....or where i can check how to do ????:
is this the latest usb drivers ??
Not able to get windows to recognize the dm500hd.
think you
is a good help from you; there isnt another solution with network????
I am trying to flash my clone 500hd
First of all it shows as 800HD on my windows machine.. then i cant flash it as it says drivers not found.. any help please i have a windows xp and windows 7 machine available
Thanks
Cant get my dreamup to work with my DM 500HD
the usb cabel sucks.
my DM 7000 no problem with serial
any tips how to connect to my DM 500 HD..
cant connect to tv or router only the green lamp glowing.
stmpotis1 (11th June, 2013)
Bookmarks