How to install enigma 2 to ipbox 9000HD
Register
Page 1 of 6 123456 LastLast
Results 1 to 15 of 79
  1. #1
    V.I.P. Member sotiris70's Avatar
    Join Date
    Nov 2008
    Posts
    31
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    1
    Thanked in
    1 Post

    Default How to install enigma 2 to ipbox 9000HD

    How to install enigma 2 to ipbox 9000HD



    We will need the following:


    1) null modem cable

    2) a usb stick.
    I used this stick
    Kingston DataTraveler 1GB


    3)The programme PuTTy isi freeware and you will find it here:
    Code:
    http://the.earth.li/~sgtatham/putty/latest/x86/putty-0.60-installer.exe
    4)The programme KCC for kathrein
    Code:
    http://www.upload-drive.com/4117/KCC2_1b_rar
    5)The Enigma2_SifTeam_Cuberevo image for Ipbox 9000 HD

    Installation guide:


    1) We install uboot 1.3.1 and higher

    2) We turn off the ipbox 9000 from the on/off switch and we connect the null modem cable.

    3) We install the Putty programme and start the programme. Look at the bellow picture:


    4) We select serial,speed 115200 and at serial line we put the com we use. Then we push open.

    5) Then the bellow picture will appear at our PC.


    6) At the same time we switch on our Ipbox 9000, press ctrl + Z at our keyboard. Continue hitting ctrl + Z .
    If you did it right, then at putty?s window it will appear the following prompt:
    cuberevo>
    If not, switch off your receiver open again putty and do again 4), 5),6).

    7) At cuberevo> we copy paste the following (Don?t forget to customize the bellow settings to your network environment. ipaddr is the ip of your decoder, serverip is the ip of your nfs-server, gateway is your gateway ip, netmask is the mask of your home-net):

    setenv menu_1 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/nfs nfsroot=/root/Desktop/root rw rootpath=/root/Desktop/root ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit";setenv bootcmd "nfs a5ff0000 192.168.1.6:/root/Desktop/root/boot/uImage;bootm a5ff0000";saveenv;boot'
    Push then enter and the cuberevo> prompt will appear again.
    Do the same also with:

    setenv menu_2 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/sda1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";seten v bootcmd "run bootusb";saveenv;boot'
    setenv menu_3 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";seten v bootcmd "run bootusb";saveenv;boot'
    setenv menu_4 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500 ip=$ipaddr:$serverip:$gateway:$netmask quiet";setenv bootcmd "bootm a0060000";saveenv;boot'
    saveenv
    8) When all is done well, at putty?s console we will get the message:
    U-Boot 1.3.1 (Jun 11 2008 - 15:53:39) - stm23-2008-03-19
    Board: cuberevo (0x2D42C041)
    Board: 12 dotmatrix vfd front
    DRAM: 128 MB
    Flash: 32 MB
    In: serial
    Out: serial
    Err: serial
    Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
    Setup mac address.
    Saving Environment to Flash...
    Un-Protected 1 sectors
    Erasing Flash...
    .
    Erased 1 sectors
    Writing to Flash... done
    Protected 1 sectors

    9) now you can restart your decoder and press the relative remote controller's button for 5 seconds to start the image you want:

    Press Button 1: start your image using nfs-server
    Press Button 2: start your image using usb pendrive if you don't have a SATA hdd
    Press Button 3: start your image using usb pendrive if you have a SATA hdd
    Press Button 4: start your original flash image in the decoder (DGStation's original firmwares and images based on them)

    10) We install KCC.
    Start KCC and set the following:


    Type your Ip adrress, username and password at the fields that been showed at above picture.
    Make a test Connection if all is OK.
    Then press at KCC toolbar the Experts button.


    Here we see our usb stick as sdb.


    Make right click at your mouse on usb?s /dev/sdb and the a menu window opens. We select new partitioner. We make 2 new partitions. The first one must be 512 mb at ext2 label and we name it XSYS1. The second partition will have the rest of usb size. Select ext2 label for it and name it XSYS2.
    Close KCC. Unplug the usb stick from receiver and place it again.

    11) Open a ftp programme. And copy paste the enigma2_cuberevo.tar.gz to
    /mnt/usb/usb0
    12) Open telnet and write:
    cd /mnt/usb/usb0
    tar xzf enigma2_cuberevo.tar.gz
    mv ./release/* .
    (At the second command, you will wait long)

    13) Switch OFF the receiver.
    Switch it On again and press the relative remote controller's button for 5 seconds to start the image you want:

    Press Button 1: start your image using nfs-server
    Press Button 2: start your image using usb pendrive if you don't have a SATA hdd
    Press Button 3: start your image using usb pendrive if you have a SATA hdd
    Press Button 4: start your original flash image in the decoder (DGStation's original firmwares and images based on them)


    14) First time the booting for Enigma2 will take about 10 min.

  2. The Following User Says Thank You to sotiris70 For This Useful Post:

    Hayssam1 (3rd July, 2015)

  3. #2
    Admin Assistant
    aftermath's Avatar
    Join Date
    Mar 2008
    Posts
    4,337
    Thanks Thanks Given 
    106
    Thanks Thanks Received 
    254
    Thanked in
    135 Posts

    Default

    A good thing about flashing this image is, when you have tried it, you just press the number 4 button for 5 secs when switching box on, and it boots your original image.

    It looks good, but it only allows scanning of hotbird at the mo... I think that when the official working version comes out, it will be the image to beat.

    P.S. the Splash screen is superb.

  4. #3
    V.I.P. Member satman's Avatar
    Join Date
    Jun 2008
    Location
    Never Never Land
    Posts
    736
    Thanks Thanks Given 
    1
    Thanks Thanks Received 
    5
    Thanked in
    1 Post

    Default

    Quote Originally Posted by aftermath View Post

    It looks good, but it only allows scanning of hotbird at the mo... I think that when the official working version comes out, it will be the image to beat.

    .
    Not entiry true my friend,,,, use latest openboxedit ( latest dreambox edit ) and send a decent satellites.xml to the box ( remember tell dbe your using new enigma2 settings ) and you can use any satellite.
    boom!

  5. #4
    Newbie
    Join Date
    Nov 2008
    Posts
    1
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default E2 and IPBOX 9000HD & DVB-C

    Is this combination possible/available? If yes - where/when?
    Also i would like if there are keys available for the nlb

    Your support is warmly welcome

    THX

    NEWCOMER

  6. #5
    V.I.P. Member satman's Avatar
    Join Date
    Jun 2008
    Location
    Never Never Land
    Posts
    736
    Thanks Thanks Given 
    1
    Thanks Thanks Received 
    5
    Thanked in
    1 Post

    Default

    Quote Originally Posted by zoco View Post
    Is this combination possible/available? If yes - where/when?
    Also i would like if there are keys available for the nlb

    Your support is warmly welcome

    THX

    NEWCOMER

    Which combination?.... yes enigma2 is available, but not for a beginner user,, only supports 1 dvbs2 tuner,,, and no cable support yet.

    If you need uk keys for NLB,, ,, use any dreambox pack!!
    the keys are related to EMU,,, not the box itself.
    boom!

  7. #6
    Admin Assistant
    aftermath's Avatar
    Join Date
    Mar 2008
    Posts
    4,337
    Thanks Thanks Given 
    106
    Thanks Thanks Received 
    254
    Thanked in
    135 Posts

    Default

    Quote Originally Posted by satman View Post
    Not entiry true my friend,,,, use latest openboxedit ( latest dreambox edit ) and send a decent satellites.xml to the box ( remember tell dbe your using new enigma2 settings ) and you can use any satellite.
    I found an old dm600 image Satman and i took the satellite.xml file, used FlashFXP to ftp it to /var.tuxbox. It works a treat, but its seems to take a lot longet scanning than normal images do.

    Thanks M8

  8. #7
    Newbie
    Join Date
    Nov 2008
    Posts
    7
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Exclamation

    Good evening
    Mr. Sotiris70
    Possible to explain my pictures of me and I reached this stage and worked Stop
    Not absorb with great regret.
    Thanks

    11) Open a ftp programme. And copy paste the enigma2_cuberevo.tar.gz to
    Quote:
    /mnt/usb/usb0

  9. #8
    Admin Assistant
    aftermath's Avatar
    Join Date
    Mar 2008
    Posts
    4,337
    Thanks Thanks Given 
    106
    Thanks Thanks Received 
    254
    Thanked in
    135 Posts

    Default

    Quote Originally Posted by madhbouh View Post
    Good evening
    Mr. Sotiris70
    Possible to explain my pictures of me and I reached this stage and worked Stop
    Not absorb with great regret.
    Thanks

    11) Open a ftp programme. And copy paste the enigma2_cuberevo.tar.gz to
    Quote:
    /mnt/usb/usb0
    did you FTp to your box using a flash tool , like FlashFXR or Dreambox Control Centre. ?

    download the Enigma2 image , from the images section in here.
    Unzip it and copy the tar.gz file to the destination that Sotiris said. /mnt/usb/usb0
    it works if you put it in /mnt/usb folder as well, just remember when you telnet the box in number 12. change the cd /mnt/usb/usb0 to above. missing the /usb0

  10. #9
    Newbie
    Join Date
    Nov 2008
    Posts
    7
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Quote Originally Posted by aftermath View Post
    did you FTp to your box using a flash tool , like FlashFXR or Dreambox Control Centre. ?

    download the Enigma2 image , from the images section in here.
    Unzip it and copy the tar.gz file to the destination that Sotiris said. /mnt/usb/usb0
    it works if you put it in /mnt/usb folder as well, just remember when you telnet the box in number 12. change the cd /mnt/usb/usb0 to above. missing the /usb0
    Thanks
    Tomorrow we test

  11. #10
    Newbie
    Join Date
    Nov 2008
    Posts
    1
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Great i'm gonna test it asap!

    Thanx!

    Eekie

  12. #11
    Newbie
    Join Date
    Nov 2008
    Posts
    7
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Good evening.
    Possible help my problem.
    When trying to enter telenet comes this letter.
    Although I was many times
    relook and ipbox
    Download telnet(1) jpg free at Uploading.com
    Thanks

  13. #12
    Newbie
    Join Date
    Dec 2008
    Posts
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default guide

    Thank you for a good guide

  14. #13
    Newbie
    Join Date
    Dec 2008
    Posts
    3
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    i have one problem with kcc

    when I do the test for connection it gives ok
    when I press expert it gives telnet failed

    how to solve this issue

  15. #14
    Admin Assistant
    aftermath's Avatar
    Join Date
    Mar 2008
    Posts
    4,337
    Thanks Thanks Given 
    106
    Thanks Thanks Received 
    254
    Thanked in
    135 Posts

    Default

    Quote Originally Posted by john1 View Post
    i have one problem with kcc

    when I do the test for connection it gives ok
    when I press expert it gives telnet failed

    how to solve this issue
    did you format the usb stick to ext2 ( Linux ), and name the partition XSYS1. ?

  16. #15
    Newbie
    Join Date
    Dec 2008
    Posts
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Hello,

    just tried to install the image but enigma2 doesn't boot. I used the CIe2T_ALL.tar.gz Image but this shouldn't be the problem

    i did everything like it was in the description and also get no error message. I updated the script with my ip-box adress (192.168.1.21) und pc-adress (192.168.1.36).

    here are the statements:
    setenv menu_1 'setenv ipaddr 192.168.1.21;setenv serverip 192.168.1.36;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/nfs nfsroot=/root/Desktop/root rw rootpath=/root/Desktop/root ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit";setenv bootcmd "nfs a5ff0000 192.168.1.36:/root/Desktop/root/boot/uImage;bootm a5ff0000";saveenv;boot'


    setenv menu_2 'setenv ipaddr 192.168.1.21;setenv serverip 192.168.1.36;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/sda1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";seten v bootcmd "run bootusb";saveenv;boot'

    setenv menu_3 'setenv ipaddr 192.168.1.21;setenv serverip 192.168.1.36;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 bigphysarea=10240 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";seten v bootcmd "run bootusb";saveenv;boot'

    setenv menu_4 'setenv ipaddr 192.168.1.21;setenv serverip 192.168.1.36;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500 ip=$ipaddr:$serverip:$gateway:$netmask quiet";setenv bootcmd "bootm a0060000";saveenv;boot'

    saveenv

    with the KCC I created two partitions on my 4GB USB-Stick and extracted all files onto mnt/usb/usb0 and when I type ls in this directory I can see the extracted files.

    But when I restart my receiver I can press the Button "3" as long as I want but no enigma boots.

    What did I do wrong?

 

 
Page 1 of 6 123456 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.