Welcome
I have a problem I need to read the ST10F280 CPU in the controller Peugeot 207 6LP computer can someone help me
Welcome
I have a problem I need to read the ST10F280 CPU in the controller Peugeot 207 6LP computer can someone help me
Xprog-m was can read it.
ST10F280 pin connection:
hi
I have a problem I need to read the ST10F280 CPU in the controller citroen c5 6LPB computer can someone help me
last update v5.0 2010-05-16 from xprog-m do it
ADEL.KSHLAF (2nd December, 2022), Adi202 (9th July, 2019), arti1 (6th April, 2013), autobuggy (18th January, 2019), bresto100 (29th October, 2020), capi (15th February, 2019), dzamine670 (4th August, 2018), line44 (14th May, 2019), mijatx (10th June, 2013), missfixit (28th February, 2015), mse2006 (5th November, 2018), okm (23rd March, 2017), tamer1024 (23rd April, 2019), taxo1965 (17th December, 2015), Toutancamon (6th October, 2018), willyboy28 (1st August, 2016)
Hi My friend hurt your hand , tank you
Say did you find the pin out for the Citroen C5 6LPB as I too am looking. Mine is the same board as your photo.
dzamine670 (4th August, 2018)
Here is what I did to solve my problem
I used an old same ecu desolderd st10f280 and used the datasheet that I have atached on page 7 to find the pins on the mcu,after i traced them to the back of the board and it read writes fine with xprog m.
I have also atached a pic of iaw 6lp.05 if anyone needs pinouts for it
sorry i forgot atachments here they are
abdonete (23rd October, 2015), ADEL.KSHLAF (2nd December, 2022), bresto100 (1st November, 2020), DANILLO (31st July, 2017), daquima (31st January, 2017), jomberykaso (12th May, 2017), joze (16th February, 2017), line44 (28th February, 2021), MCFOREVER (17th July, 2020), missfixit (28th February, 2015), pablobonome (3rd June, 2016), rachmach (25th December, 2015), shanektm450 (21st September, 2017), shtyrya2 (5th May, 2014), unBond (3rd September, 2019), willyboy28 (1st August, 2016)
hi friends
i am glad to find this forum.hope that i can help others.
i have problem on ST10F280-B3 ON IAW-6LPB FOR C5.
Which device is better to read/write this mcu?
Hi, I need to replace the L9108 multi driver in the IAW6LPB, anyone knows a good suplier for these chips?
Thanks.
Thanks for the Data sheet file, will have to carefully remove the ST10F280 from my board and trace the locations. Shame I dont have an trashed one to experiment with as my board is different to yours. In fact looks the same as kautuvera has.
Bookmarks