hi, can anyone confirm if this is only for dm500s or will it work for any dreambox- dm600pvr(clone),has anyone sucessfully jtag'd a dm600, thanks
thx for your work. hope blackbox 500s will boot.
//Edit:
Green LED is on, flashing the Bootloader with DOS & also Windows Version works. But I cannot flash the Box with Dreamup. It hangs at "upload completed, waiting for acknowledge". I try many differnet DreamUP versions. I also try many different bootloaders. Always the same. Green LED is on, Dreamup & patched Dreamups doesnt work.
But I get an Output on Serial Port after some time.
And I get this with similar Tool to DreamUp:Dreambox DM500
ENET: send frame error.
bootp packets sent = 5
BOOTP failed.
Network boot failed.
Unable to read configuration data
--- Device Configuration ---
Power-On Test Devices:
000 Enabled System Memory [RAM]
----------------------------
Boot Sources:
001 Enabled Application in Flash [FLASH]
002 Enabled Ethernet [ENET]
local=0.0.0.0 remote=255.255.255.255 hwaddr=00093401a43f
003 Disabled Serial Port 1 [S1]
Baud = 9600
----------------------------
Automatic Boot: Enabled
----------------------------
1 - Toggle Power-On Tests
2 - Change a Boot Device
3 - Change IP Addresses
4 - Ping test
5 - Change Baud Rate for S1 Boot
D - Display Configuration
0 - Exit Menu and Boot Application
->
The Flash is a TE28F640. I also tried other computers and RS323 Cables. Nothing works. Any ideas?Power ON DB Device [ESC to Abort]
HW ID: [000D447265616D626F782044004D3530300D]
Dreambox Detected...Ok!
Data1: [6C6F6164696E6720696E7374722E2066696C65]
Sending Flash Loader...
Data2: []
greetings
Last edited by r00x; 24th February, 2012 at 10:32 PM.
hi, can anyone confirm if this is only for dm500s or will it work for any dreambox- dm600pvr(clone),has anyone sucessfully jtag'd a dm600, thanks
I'll Hope this tool can safe my Dreambox DM500-C.
Thanks
I'll hope it will work for me to safe my dreambox DM500-C.
Thanks
BIEN IL DEBLOQUE DM 500S?
Thank you my dreambox is working again
Not that nice of Gemini to bomb my DM500. I think I'll use some other image next time..
hi, is that file usable for dm500 clone as well??
Thank you sir..........
Jtag work perfect but not dreamup my dreambox.I recieve error when put image
can be used as flash dream
I managed to DOS Jtag it with philip tuner bootloader but i still unable to flash image by DreamUP.
Window Jtag cant link up.
What is wrong ?
Last edited by jiangou2007; 31st July, 2012 at 02:37 PM. Reason: add info
anyone out there with DM500C CABLE bootloader(blimg) to share ? ?
does the image work with dm500s clone ?
Bookmarks