CUMMINS ECM REPAIR TIPS

**jctech** · 13th January, 2011, 12:01 PM

Originally Posted by donniemnemonic

thanks jctech for all your help can you please upload the complete eci, c94 and cpi folders from the incal disk you speak of.

Download links are here
http://www.digital-kaos.co.uk/forums...2010-a-180827/

**donniemnemonic** · 14th January, 2011, 12:35 AM

Originally Posted by jctech

Download links are here
http://www.digital-kaos.co.uk/forums...2010-a-180827/

Hi jctech.
sorry to bother you m8 just wanted the eci, c94, and cpi folders from disc. unable to download the entire incal disk because of my internet setup. I just want the above three folders you find in INTELECT/ESDN/DATA If you could sent me each of the above files which will contain the two files e.g eci folder will contain CAL folder and eci.cmp files. please winrar the files cause have download issues when zipped. Please help me mate trying to resolve that problem with the M11 I mentioned earlier in this thread...

**hercamp** · 14th January, 2011, 03:54 AM

cummins insite /calibration data dont works like that...you need put an incal disck ...non expired..(just works for 6 months) and connect to ecm ...wait for insite aprobal and see the calibration listed....choose one and download to ecm...after that insite will ask for fleet calibration code/ or fleet calibration acount .
after that you can download the calibration to ecm.

**donniemnemonic** · 14th January, 2011, 07:05 AM

Originally Posted by hercamp

cummins insite /calibration data dont works like that...you need put an incal disck ...non expired..(just works for 6 months) and connect to ecm ...wait for insite aprobal and see the calibration listed....choose one and download to ecm...after that insite will ask for fleet calibration code/ or fleet calibration acount .
after that you can download the calibration to ecm.

thanks hercamp for your input. Have managed however to use files sent to me by hpcummins in an earlier post this way which were for an april 2010 calibration of eci the celect calibration file. Just want to try out with the other files so that i can post my findings for everyone to share without having to download entire cd for incal. To use these files hpcummins said that he had to change the date back on his computer whilst in insite then calibrate his ecm but I have also managed to alter the date on this file and it now reads as March 2011. So it is possible to use calibrations after the 6 month expiry. If some1 has the files I asked for please post so I can also post my findings. Thanks DK bros you guys rock.

**Poptest** · 14th January, 2011, 02:14 PM

Originally Posted by donniemnemonic

hi all.
Well didn't know where else to post this so this thread seemed to be most relevant since it involves ecm repairs I need help identifying the cpl for this motor it is an M-11 celect plus and its engine serial is 34810648. The dataplate has been removed off the engine and I am trying to solve hardstart and high idling issues. The hardstarting I have managed to rectify by replacing the fuel pump now trying to remedy the high idling and also had forgotten to mention that the engine will continue to run long after the ignition is switched off. Have come across this before and it was a result of wrong cpl ecm on truck. Would also be grateful if you could state correct injector part number for this particular motor. Many thanks in advance to all my DK brothers and sisters.

Correct injectors are 3411735 and/or 3095040.

**mecaniquito** · 14th January, 2011, 11:33 PM

http://www.digital-kaos.co.uk/forums...2010-a-180827/ CAN HELP ME WITH THESE LINKS BECAUSE THE NUMBER 3 IS NOT WORKING PLEASE HELP ME

**mecaniquito** · 14th January, 2011, 11:35 PM

**hercamp** · 15th January, 2011, 02:26 AM

is normal how I ve seen ....maybe you need premiun account or something...dont know but I can open without problems.

**donniemnemonic** · 16th January, 2011, 07:55 AM

hi to all.
could someone please post the following files from a recent/current incal disk. 1. esdninfo.dat
2.esdndata.cmp
3.eci folder containing ( cal and eci.cmp files)
4.c94 folder containing (cal and c94.cmp files) And finally 5.cpi follder containing (cal and cpi.cmp files)

Thanks to all in advance........
donniemnemonic

**ECM specialist** · 17th January, 2011, 02:43 AM

Originally Posted by jctech

get hold of a camshaft gear, and spin it with a motor to give the ecm a speed and position signal.
You will need injector solenoids, all sensors need to be connected, but only oil pressure sensor needs its status to change to show oil pressure with the engine running

hello . please I been looking to get some cummins caltrem manual how to us it . please if you can help me on this . i been useing incal long time . but not caltrem..
thanks

**je69** · 17th January, 2011, 06:47 AM

HI DK FRIENS I HOPE YOU ALL FINE,I HAVE PROBLEM WIT A ISX WIT EGR ITS A 8287 CPL S/N 79025128,THE PROBLEM ITS SHUTOOFF VALVE CODE 254 ACTIVE, code 2346 active and code 2348,active i star to work wit fuel shutoof valve, no extra wires, check wire from ecm arnes to shutoof valve and look good,i put a new valve still the problem, i disconec the wire from the valve, and put a 12v external wire to the valve and star the motor, she run ok but fan its on, the rpm its 950, check all the wires all ok, i belive its a ecm troble wat can?t i do help please, ineed recalibrate the ecm or put a new, thanks in advans friens

**je69** · 17th January, 2011, 08:45 PM

hi dk friens referent to the isx ecm problem, i open the ecm and its born inside so i got to replasate istill need help calibrate the new one may you guis helpme the truck its international 04 engine s/n:79025128, cpl 8287, isx-cm870,ecm/n:23008177,model sta15 wit egr apreciate moch you help, sory by my english, ihope macura or hercamp read this, i now they have alots experience on this, but i now you all guis are great thanks on advans.

**hercamp** · 17th January, 2011, 09:14 PM

maybe you have internal damage in ecm ...you can relaibrate but maybe that wont solve your problem..problems with fuel valve is ..when has damage blow up the internal resitance in the ecm.

**Poptest** · 17th January, 2011, 09:15 PM

Originally Posted by je69

hi dk friens referent to the isx ecm problem, i open the ecm and its born inside so i got to replasate istill need help calibrate the new one may you guis helpme the truck its international 04 engine s/n:79025128, cpl 8287, isx-cm870,ecm/n:23008177,model sta15 wit egr apreciate moch you help, sory by my english, ihope macura or hercamp read this, i now they have alots experience on this, but i now you all guis are great thanks on advans.

You need Insite and Incal to calibrate this ECM.

**jctech** · 18th January, 2011, 02:18 AM

Originally Posted by ECM specialist

hello . please I been looking to get some cummins caltrem manual how to us it . please if you can help me on this . i been useing incal long time . but not caltrem..
thanks

This is an ECM repair thread, there is a Calterm thread on this forum. Try and post your messages under the correct thread.
The Calterm help file is part of the program, it will give you instruction on how to use the program, have fun, dont blow up your engine.

Thread: CUMMINS ECM REPAIR TIPS

Thread Tools

Display

caltrem

Bookmarks

Bookmarks

Posting Permissions