Hi
Received my willem adaptor and did my first read on 29f400 chip.
Seems to work great.
Hi
Received my willem adaptor and did my first read on 29f400 chip.
Seems to work great.
I have been using GQ-4X with adapter. it is good and reliable.
check this website:
A low cost EPROM EEPROM MCU Atmel Microchip PIC I2C SPI programmer online store
I use Xeltek SuperPro 3000 and never had problems with reading flash,eprom,mcu... This device have all adaptor one to one and you can make it you self.Reading and writing is 100%.By the way I have Galep4 too but Xeltek is much better.
Gq-3x and gq-4x work fine for that. Cheers.
I'll try it - New EZoFlash+. Parallel memory programmer.. Now the stage of assembly. Assemble, test it, tell about it
Sorry for bad English
What you can edit the downloaded dump 29F800 or 29F400?
So need a program for editing calibrations in the dump.
Sorry for bad English
hello ! I have some problem width my psop 44 adapter in my pcb 3.5. i can not erease the 29f400 but i can read something !
I try to make shore if the pins are good contact and it seems ok !
this is a 29f400 from a bosh edc15 Peugeot 206 hdi !
I install the newest willem 5.5 and I see some diferences in the 97ja and the 99d8 !
why ?! is there any reason ?!
I gona lef one attachement !
if somebody cant help me ![IMG]file:///C:/DOCUME%7E1/VIRALA%7E1/DEFINI%7E1/Temp/moz-screenshot.png[/IMG]
thanks in advance !
Try to select a device Flash 29/39/49Fxxx,
and select 29Fx00 8/16bit,
then select AM29F400.
Do not forget to attach 12Volt DC power supply.
Is this well read? anyone to the rescue?
Download VOLVO s60.BIN from Sendspace.com - send big files the easy way
Sent from iPhone 4S
i use wellon vp480 so far had no problems with any chip including the am29fxxxx series.
7.31sec@203.3mph
PROGRAMMER EEPROM
i use willem with 98D12C3 soft version
PERFECT
EzoFlash HW v4.5 is the best solution for smal amount of money , it work better then willem and last willem SW with it.
I was make and test many many times and newer false.
Always do ID first and if you dont get right ID from device do not program !
Check connection's and test again.
Regard's
[I]Automotive Electronics Solutions
Mercedes-Benz Reverse Development Engineer ...
Mercedes CFF 2010-2017 CFF all models all modules
Vediamo help flashing over teamviewer ...
JLR SDD online + offline ...last official ...
Bookmarks