" Hungarian VAT = 25% "
I think I just shat myself a little!
Hi all,
Thanks for the questions.
Before anyone would write anything, I was looking for a key programmer which can copy 4D transponder to TPX2. I wasn't inerested in any other quality or something else.
I wrote a lot on this forum and asked for help but didn't received any.
So I decided I would check all of them.
Currency exchange rate:
$1.00 = 230HUF
GBP 1.00 = 340HUF
EUR 1.00 = 290HUF
I got three offers from 3 Hungarian distributors.
Zed-BULL = 1700EUR
TPX clonner = 500EUR
=================
Total = 2200EUR -200EUR discount = 2000EUR + VAT = 665000HUF
Hungarian VAT = 25%
JMA TSR5000 + TPX clonner = 450000HUF inc VAT
AD900/Megacopy = 2000EUR
90 eep application = 90 x 36EUR = 3240EUR
TPX clonner = 700EUR
==================================
Total = 5940EUR + VAT from elmetools = 2153250HUF
After considering all the programmers and their prices I decided I would buy these chines clone key programmers because the total price of all chines programmer is rather lower then only one authentich programmer.
All the chinese programmer cost me $240+$549+$630=$1419
So any may want to buy CR2 or ZB the functionality of both programmers are almost the same.
I will keep the ZB but sell CR2 and super AD900.
Regards,G
" Hungarian VAT = 25% "
I think I just shat myself a little!
Hi all again,
Yes, Hungarian VAT is really 25%.
I have a little problem with ZB 4D cloning.
Please check the attacment, but the car is started.
I don't know why?
Maybe enough DATA bytes at Yaris?
RESP code is different.....
The CR2 copied all info to TPX2 !!!
Regards,G
I have uploaded the manual and software from OBDFACTORY as you can see the hard unit is slightly different, Key pad colour etc which shows different batch/manufacture of unit.
Gopelhu yours from Cherry seems to be better unit for software etc so if anyone contemplating buying from any other source than Cherry may want to get pictures and software first so that you can compare to see what batch of machine you may receive. OBDFACTORY are not happy selling theres due to problems so again be carefull off other suppliers.
I'm now swaying back to CR2 after issue with 4D to TPX2 something not right somewhere.
Do not buy this version it comes with zedqx software, also the screenshots aint right.
Also the 'obd' screen just shows the VAG group, looks like its zedqx software modded to include vag-prog or similar made to look like zed-bull
My version only has usb port, power switch, power jack and a 6 pin socket
Ive ordered one from yoyo at anyscan, i sent her glopehu,s pictures of unit and software pictures to be sure, and she has assured me its the same when it arrives i will post pics and post test results.
You need every tool in the book, to do this auto locksmith job.
Thanks Paul for info, if yours doesnt have OBD port and is the same unit as Gopehus then that would explain why no OBD lead was shipped with his.
Other question would be how can it utilize OBD functions?
Hi all again,
The OBD port of Zed-BULL is 6pin telephone connector.
I uploaded the original Zed-Bull pictures and my Zed-BULL pictures. Please compare them.
Regards,G
Gopelhu, would you still buy over CR2 ? is it worth having both? Thanks.
Hi,
Yes, it is worth buying both.
CR2 cost is from $550 till $750 and ZB cost is from $580 till $760.
Zed-Bull available :
Zed-BULL V508 Key programmer
CHEERY TECHNOLOGY LIMITED
I bought from Cherry. Pls contact Jacky.
Regards,G
Last edited by gopelhu; 19th August, 2010 at 06:04 PM.
So after that TPX2 info missing problem, what will you recomend as the best for copying TPX2 and in general???
Thanks...
Hi,
I would recommend both ( ZB and CR2 ).
ZB tells from 4D if it is a Master or Valett.
ZB copies only the first 8 bytes.
CR2 includes a 4D decoder so it copies the 4D chip to the full.
While in CR2 there are 44 eeprom applications, in ZB there are 55.
I will write later these fuction.
I will keep both programmer for such money.
Regards,G
Hi all,
Today I checked my CR2 content and I found this COM cable.
This cable works with my ZB.
Here are the pinout and some pictures on this cable.
I have an idea.
All V.A.G. cars communicate with VAG-COM COM DB9 interface (KW1281 and KW2089).
All Toyota immobox communicate with KWP2000 protocol.
I will make the VAG-COM COM DB9 cable to my ZB for OBD function and i will let you know the result.
Regards,G
Bookmarks