Zed-Bull clone users, look here!

**canorivera** · 17th August, 2010, 10:45 PM

That's great gopelhu, I will be waiting for your test's feedback...

Thanks again for all your help.

**pasonjayne** · 17th August, 2010, 11:10 PM

Do you think it makes a difference where we buy these Zed Bull clone units from as i suspect they all come off the same production lines and are distributed across all the chinese online sellers.

I'm looking to buy one of these units and have in the past bought a lot of units off OBDFACTORY and have had no problems with their kit. It makes sense to stick with a supplier that has delivered in the past what they say unless of course there are more than one type of Clone Zed Bull units knocking around with some better built than others. If this is the case then i think it may best to go with a supplier that a DK member has used and has no problems.

Opinions appreciated.

**obdmaster** · 18th August, 2010, 09:53 AM

gopelhu m8, thankyou for pictures im eagerly awiating your test results. Many many thanks m8.

**gopelhu** · 18th August, 2010, 12:27 PM

Hi again,

Today I tested ZB china key programmer and works perfectly 100%.

1st: It can copy 4D transponder into TPX2 in stand alone mode. It does NOT need internet connection.

2nd: Eeprom fuctions work perfectly and does NOT reduce tokens. Check the ZB_Atmega2561 picture. It cannot overwrite the token.

3rd: Transponder fuction work but at the moment I do not have blank transponder.

4th: There is OBDII fuction implemented but I haven't received OBDII cable in the package.

All in all it is worth the price, it is worth buying it.

It is better than CR2 because 4D decryptor is in the main unit.

Regards,G

**pasonjayne** · 18th August, 2010, 12:38 PM

That is good news, seems like a worthwhile purchase was almost going to buy CR2. You mentined that the OBD cable to supplied, was this missed off shipping or still in production to work with the unit?

**gopelhu** · 18th August, 2010, 12:45 PM

Hi all,

Yes, it was missing from the package.

It was not sold with the OBDII cable.

Kit contains:
1: main unit
2: security login card
3: USB cable
4: power supply
5: 1piece DVD (setup and information)

Regards,G

**pasonjayne** · 18th August, 2010, 01:20 PM

I have asked my usual supplier to open one up to see what comes with the unit, so i will update to see if they should come with it or not and to see if they are identical stock to the one you bought.

**canorivera** · 18th August, 2010, 01:20 PM

So this you bougth from a different provider than OBDFactoty, any reason??

Thanks.

**gopelhu** · 18th August, 2010, 01:32 PM

Hi,

Yes there is a reason.

What obdfactory sells it works with Zed-QX v2.02 software and NOT with the IEA software.Pls check the attacment.

This is the only reason.

Regards,G

**canorivera** · 18th August, 2010, 01:34 PM

Originally Posted by gopelhu

Hi,

Yes there is a reason.

What obdfactory sells it works with Zed-QX v2.02 software and NOT with the IEA software.Pls check the attacment.

This is the only reason.

Regards,G

That's a BIG reason, thanks my friend, it would be great that you continue giving us your comments...

Thanks...

**Fallen** · 18th August, 2010, 02:23 PM

Hi gopelhu, nice reporting!

I'm shocked that it can copy 4D to TPX2. You actually cloned a 4D key and started the car with it?

**gopelhu** · 18th August, 2010, 02:47 PM

Hi,

Yes I cloned a 4D Yaris transponder to TPX2 and after started the car with TPX2 transponder.

Regards,G

**pasonjayne** · 18th August, 2010, 03:19 PM

Spoke to OBDFactory and they confirmed they have had some bad feedback on the ZedBull they are selling and are now pushing CR2 instead for this reason.

Your supplier must have different batch, you not think it is only a software problem rather than hardware?

**paul_12345** · 18th August, 2010, 03:54 PM

I haven't used alot of functions of my zed-bull but the few eprom functions that I've used work well.

id's transponders fine etc, not tried copying to txp2 as I haven't got any.

Dont see any reason why all the eprom functions wouldn't work as it does fiat id48 perfect which ad900 dont do.

There's a few different factories making them.

Mine looks the same apart from it has a green screen rather than the blue.

Just ask for a screenshot of the software if uses before buying or ask the version of software it uses.

Also for anyone who's interested you can open the exe with reflector to see the code, also works with the newer software posted here. (by the way the newer software dont work on this version it gets stuck on retrieving number of tokens)

**pasonjayne** · 18th August, 2010, 04:34 PM

Thanks Paul, deffo worth knowing that. Looks like the machine Gopelhu bought from Cherry works fine with 508 software and the only setback was the missing OBD cable.

I suppose as long as people like Cherry dont change their suppliers then there could be common ground where to buy good working machines from.

So question for Gopelhu do you think the clone Zed Bull you have from Cherry is better than the CR2 you had from OBD factory, not for quality but for functionality. Or would you say it is handy having both machines?

Thanks all for the info so far.