Daihatsu Terios Immo Problem

**simon77** · 16th January, 2018, 04:13 PM

that should be a 4d67 chip . need to virgin file then add 2 keys by inserting them and wait for immo light to switch off .then re-sync ecu for 30 mins from dlc pin 14 and 4, car will start 100%

**mehmet becker** · 6th February, 2018, 04:32 PM

hi should this be pin 14 and 4 or 13 and4

**mehmet becker** · 6th February, 2018, 04:47 PM

dottecu

i checked your file
they key data you post does not mach te immo data
key1 is 73 55 A9 71 key 2 is 71 35 03 A7 this is the key data from your immo box
looks like a c chip

**alunecosu** · 14th February, 2018, 06:56 PM

Please help!
I try add new key to daihatsu terios 2002 and cars not start with no keys.the first key with which the car started is

data stream-00 00 7E 7C 3A 26 20 00 00 00 00 BB 25 7E 00 00
tiris 4c data - 0000000004645C3E

add key-
data stream- 00 00 7E 04 4B 9F 50 00 00 00 00 87 3B 7E 00 00
tiris 4c data-000000000AF9D220
I atashed dump original from immo box and imobilizer

cars not start

this dump is calculate with vvdi2 transponder programer(imobilizer by dump)93c66 dump with 2 key

not work upload in forum and I upload files here https://ufile.io/00ojp
with no keyswith no keys

**alunecosu** · 14th February, 2018, 07:06 PM

I try FFFF on 93c56 immo box eprom and not start cars ,I try short pin 13 diagnostic to 4 pin 30 min nothing hapend.

sory for 2 post but I m desperate.
I'm desperate

**alunecosu** · 15th February, 2018, 08:56 PM

I write dump pair ecu and immo(16 bits) and cars not starts.how resolved ?I think i by cars terios daihatsu

**alunecosu** · 22nd February, 2018, 09:10 AM

My problem resolved with clone dump.For another user dump tested and work.Add key and start the cars!

https://ufile.io/lvzos

**keymaker.gr** · 16th April, 2018, 08:53 PM

can anyone please share files....i got same prob...

**Dr Alex** · 25th April, 2018, 07:31 PM

Originally Posted by alunecosu

My problem resolved with clone dump.For another user dump tested and work.Add key and start the cars!

https://ufile.io/lvzos

hi friend,can you share the files for daihtsu please?
Thanks

**klaudio** · 26th April, 2018, 01:51 AM

if ignition barrel looks like this, you need a key like attached otherwise the antenna won't pick up the transponder, another problem i found was that it had 4 key stored in dump and will only work with key #4.