So, in the car trace OBD pin12 back to the ECU, if exist you have that possibility.
So, in the car trace OBD pin12 back to the ECU, if exist you have that possibility.
pin12 was used in older cars not C3 I would say.
Col19 (24th January, 2020), kdijagnostika (7th February, 2016), titoun (16th November, 2015), Zmann (7th November, 2015)
hi. i have version 7.25, sw open , connect to vci all ok.
but when i serch to finde dtc ore codificatio tool cant finde ecu.
dont finde nothing, ecu dont fine ,bsi same,abs,airbag ecc ecc all cant finde.
with other diag i can do diagnostic.
WHAT IS THE PROBLEM ?
flash sram, resistor,capacitor , driver??? im confiuse .
help thanks.
Hello to all. Lexia reflash went wrong please help. Before reflash was var.B serial I dont remember. appli 4.2.2. After reflash no serial and no version.
Also have seen your another post image.
-did update with vci_updater? any chance to try second time and see?
edit, oh no second time for you by this method
-if no success your internal flash is corrupted you will need to proceed by Fujitsu FlashKit or Fujitsu FMC16LX, search the forum.
Last edited by Zmann; 7th November, 2015 at 03:09 AM.
mexanico1971 (7th November, 2015), titoun (16th November, 2015)
Good afternoon dear friends,
I come here to expose my problem, I have a lexia3 interface, chinese I think, and at first it worked well and detetava all modules, but now the time needed to erase a mistake, and diagbox, it is linked to green light this the work but did not recognize the interface for anything.
I decided to delete the diag and install the PP2000, as for Peugeot 406 hdi comes well.
After a few attempts he there recognized the interface but does not communicate with the other modules, only detected the engine. And since my colleague had complained that he had also given the same problem.
What and who will be able to be the problem, can you help me?
I will leave here some pictures of bugs and interface.
When it was acquired
The evidence that has worked with other modules
The errors
romyfranco (7th January, 2016)
i see your tool and is really bad quality bro , but you need to try to fresh install on windows , and after that install separate the lexia and pp2000 and their updates and install all drivrs after that try again it sopouse to work .
But when i see your tool hardware not sure .....
Regards
Chiptuning/DPP/EGR/LAMBDA(O2)/FLAPS/Adblue/DTC OFF / EDC17 Immo OFF
Kess v2 eu. clone full/Ktag eu. Clone 6.070 full
Info on pm
Kess v2 ori , K-tag ori, MAGPro2 x17, Galleto v54 EU ,Winols ,AVDI full ori, Orange 5 /Omega /Xprog/Upa all ori , VAS Pc , Porsche PIWIS 2 and etc........
For the diagbox, and pp2000, they are installed on different computers machines.
On what had diagbox even ended up uninstalling diagbox.
Then I grabbed the other has XP and PP2000, and it managed to diagnose, but only only the engine module.
Relative to the interface, you say it's a lot of poor quality?
I mentioned that was Chinese.
Lexia Chines that green LED flashes and stays on. Recognized in the OS (XP) without connecting to the Internet, but not recognized in Lexia or Diagbox.
Can be any electronic component?
It has been ressoldado and not solved.
Regards for instruction to resolve.
Hi Oliveira,you're very welcome to Kaos.
However,you need to introduce yourself first before posting...please do so here : Introduce Yourself
Thank you...
Aaahh ! I love the smell of Eeprom in the morning...
" We'll come in low out of the rising sun, and about a mile out, we'll put on the music . . . "
Hello.
Maybe someone can help me.
I have 3 pieces of lexia.
One is fully working and tworzenie pieces are broken.
One doesn't recognize that it is connected to car and I have swapped pcb with relays from working one and it looks that problem is on bardzo with mcu? Also relays doesn't click. Sezon one problem is on relay board and it cannot get VIN from car and can't connect to any unit. Swapped boards and the problem is on board with relays.
Wysłane z mojego F5 przy użyciu Tapatalka
------------------------------------------------------
Work is a primitive way to spend Your free time.
F.Kiepski.
Thanks bro
Envoy? de mon SM-N9005
thanks to all my friends
Bookmarks