DRS 6 and DDEC V files

**ddmech** · 23rd July, 2011, 12:15 AM

You have too many numbers in your ser. #.Check and verify.

**aaronmtz** · 25th July, 2011, 08:44 AM

yes ddmech im sorry i verify and the correct engine serial number is 06R0290217 please help me i really need it

**aaronmtz** · 26th July, 2011, 02:13 AM

please everybody helpme i really need that calibration 06R0290217

**ddmech** · 26th July, 2011, 02:17 AM

Is this a gk,430hp with 5575 injectors?I wont have the exact ser# but probably have one that is same configuration.

**aaronmtz** · 26th July, 2011, 03:42 AM

yes its 430hp at 1810thanks ddmech

**aaronmtz** · 1st August, 2011, 02:22 AM

please somebody helpme i need the cal for 06R0290217

**makura** · 5th August, 2011, 10:21 AM

Hi guys
I need cal for 06R0680960
Thanks in advance

**ddmech** · 8th August, 2011, 07:12 PM

These cals are what I have collected around the web.Not my own work other than getting them all in one place.Many of these came from jabkissmya.The thanks should go to him!
There are about 140 in all so everyone enjoy.

**sova** · 9th August, 2011, 02:49 PM

Hello
You can get to RapidShare?
I can not download.
Thank you very much.

**ddmech** · 9th August, 2011, 04:52 PM

I dont know if I can do that but I will try sova.

**ddmech** · 9th August, 2011, 05:06 PM

https://rapidshare.com/files/2811672...ing_System.rar

Try this my friend.

**hungvi2004** · 9th August, 2011, 05:25 PM

Originally Posted by Lickety Split

just a thought,but i just found this in another thread...but come to think of it,i think this will only effect the temp correction,which will not change the overall settings...maybe we need to look further for the main setting tables and do something similar with those...worth a try i think...

Tip for the day. To increase fuel, open calibration, go to:

SHARED, TABLES, temperature compensation, torque_temp_correction

Left click top corner of the 1D table so the whole table turns black. Right click, select block offset and add whatever percentage you want to increase horsepower by. I.E 0.1 = 10% horsepower and torque increase.

Whoo Hoo, there'll be some blown apart green motors now!!!!

dear brothers

Could you help me? i want to reduce consuming fuel but i don't known to adjust which parameters in calibration file by ddct, if you known please help me, thanks & regards