DRS 6 and DDEC V files

**Juanincho** · 17th November, 2010, 11:55 PM

Anybody have files (calibrations) for DDEC V to install in DRS 6 ? Thanks for sharing !

**jabkissmya** · 18th November, 2010, 02:59 AM

Originally Posted by Juanincho

Anybody have files (calibrations) for DDEC V to install in DRS 6 ? Thanks for sharing !

engine serials?

**Juanincho** · 18th November, 2010, 05:53 AM

06R0810415
06R0795570
06R0807355
06R0734321
06R0812379
06R0858298
06R0858345
06R0790377
06R0799568
06R0833576
06R0800025

**jabkissmya** · 18th November, 2010, 02:20 PM

you may need to upgrade to a newer version of drs depending on which one you have, so i have included drs 6.16

just extract folder to c:\detroit diesel and copy/merge/overwright files as needed.

when you run drs it will tell you it is being upgraded and shut back down, this is just giving you the new server updates to install new ecm versions. Click program, if truck does not have a matching serial to whats on you list, it will let you select from a list what you want to program and you should see all serials you listed plus 06R1999999. this is the turbo actuator program for use with dddl 6.44 and higher. save all accumulated data before programming. as it might loose all accumulated data during reprogram.

**Texas149** · 18th November, 2010, 05:14 PM

I got it going thanks

**Juanincho** · 18th November, 2010, 05:15 PM

Originally Posted by Texas149

I need the program file for a seies 60, engine serial# 06R0324268 ecm soft verson 32.08, 430 hp I was going in to change ecm inputs for cruise and accidentally hit update calibration at DDC instead and now ecm is in boot mode! Please help!

Just to be sure, it is a 6067GK60 engine? Download some other serial number then use dct to change sengine serial number, max rpm and so on.

**educar21** · 4th February, 2011, 05:02 AM

Good day fellow forum is very interesting but I could not achieve to get the files for use with the drs

Originally Posted by jabkissmya

you may need to upgrade to a newer version of drs depending on which one you have, so i have included drs 6.16

just extract folder to c:\detroit diesel and copy/merge/overwright files as needed.

when you run drs it will tell you it is being upgraded and shut back down, this is just giving you the new server updates to install new ecm versions. Click program, if truck does not have a matching serial to whats on you list, it will let you select from a list what you want to program and you should see all serials you listed plus 06R1999999. this is the turbo actuator program for use with dddl 6.44 and higher. save all accumulated data before programming. as it might loose all accumulated data during reprogram.

**educar21** · 4th February, 2011, 05:05 AM

buen foro los felicito por muy buen tema

**Javidiesel** · 27th October, 2011, 02:39 AM

Hi, every time I copy and paste the files to my DDRS 6.16 they desapear. I copy the files downloaded from DDC main frame from may lap top at work and paste to may DDRS at home and they works ok. Can you help me to find out what Im doing wrrong. Thank you

**Lickety Split** · 27th October, 2011, 04:54 AM

Originally Posted by Javidiesel

Hi, every time I copy and paste the files to my DDRS 6.16 they desapear. I copy the files downloaded from DDC main frame from may lap top at work and paste to may DDRS at home and they works ok. Can you help me to find out what Im doing wrrong. Thank you

Check the file type before you save them...i.e. are they ".cal,.met,etc"
When the program looks for a file,it is looking for a certain type and only those will show. Also,make sure you are saving them in the right place...you can always change the search to all types and even tell it to look in another folder.

Sure would like to get some files for mine off of the DDC Mainframe.

Hope that helps,let us know.

Mike

**hackmexicano** · 7th July, 2012, 08:15 PM

Originally Posted by jabkissmya

you may need to upgrade to a newer version of drs depending on which one you have, so i have included drs 6.16

just extract folder to c:\detroit diesel and copy/merge/overwright files as needed.

when you run drs it will tell you it is being upgraded and shut back down, this is just giving you the new server updates to install new ecm versions. Click program, if truck does not have a matching serial to whats on you list, it will let you select from a list what you want to program and you should see all serials you listed plus 06R1999999. this is the turbo actuator program for use with dddl 6.44 and higher. save all accumulated data before programming. as it might loose all accumulated data during reprogram.

THANKS!!!

**bigfredz** · 18th August, 2012, 07:27 AM

Thanks for the download. i cannot open program says ot lisenced or missing key can you help Thank YOU!!!

**anih3n** · 23rd August, 2012, 09:09 PM

This are the cracks for DRS!
http://dl.dropbox.com/u/86304029/DDRScracks.rar

**anih3n** · 23rd August, 2012, 09:07 PM

Works very fine on Win7 Home Premium X64!!!!

Thanks for share!!!!

DK rules!

**bullrider** · 29th April, 2013, 06:06 AM

Originally Posted by jabkissmya

you may need to upgrade to a newer version of drs depending on which one you have, so i have included drs 6.16

just extract folder to c:\detroit diesel and copy/merge/overwright files as needed.

when you run drs it will tell you it is being upgraded and shut back down, this is just giving you the new server updates to install new ecm versions. Click program, if truck does not have a matching serial to whats on you list, it will let you select from a list what you want to program and you should see all serials you listed plus 06R1999999. this is the turbo actuator program for use with dddl 6.44 and higher. save all accumulated data before programming. as it might loose all accumulated data during reprogram.

i installed the program succesfully, but when i run it a message pops up says ( can not find root in directory) what am i doing wrong?

please help.
thank you all.