ei ! put the dump of the ecu here !
I not shore but maybe 24c02 !
put the numbers of hw and sw like 028xxxxxxx 103xxxxxxx
Hi mates, I need immo off in a Seat Toledo 1.9 TDI year 1999.
I tryed with Vag K+CAN commander but not communication with ECU.
I have dump of dash eeprom 96c66.
I don?t know what I need to override the immo.
The problem is that the car has failed several times to start and have to make several attempts. Then I prefer to override the immobilizer to avoid problems.
As I read I have to remove the ECU and I think inside is a 24C02 eeprom and I have to change data in it, but I don?t know how to change it.
Can not be overridden the immo in the dash? Always must make it in ECU?
Data from the ECU and Dash are:
Address 01: Engine
Control Module Part Number: 038 906 018 BT
Component and/or Version: 1,9l R4 EDC 0000SG 2130
Software Coding: 00002
Work Shop Code: WSC 00046
VCID: 69D2BFFA7F23F454
Address 17: Instruments
Control Module Part Number: 1MO 919 880 R
Component and/or Version: S5-KOMBIINSTR. VDO V13
Software Coding: 04140
Work Shop Code: WSC 03726
Additional Info: IMMO-IDENTNR: SEZ7Z0W0006196
VCID: 62C0A8D68215A70C
Thanks in advance
ei ! put the dump of the ecu here !
I not shore but maybe 24c02 !
put the numbers of hw and sw like 028xxxxxxx 103xxxxxxx
Mate,
It's 24C02 as you said, post your dump here and gladly i will be helping you with that issue
Thanks,
ECU Commander Studio?
Hand in Hand to Protect our Efforts - Stop Hunting Our Work
>>>>>EBAY SELLERS<<<<<
I'm not Sharing Passwords!
Do not argue with an idiot. He will drag you down to his level and beat you with experience
Thanks for your responses m8. I don?t have now the car here.
As soon as I have the car I dissassembly the ECU and post here the dump.
Regards
This car is Inmo2, it hasn?t got inmo at ecu, only at dashboard
Dashboard eeprom maybe 93c66 or 93c86
H.Wessel
Yes, it?s immo 2 and eeprom os dash is 93c66 and I have the dump.
But how to override the immo?
I had read many posts and I see that everybody make off immo in ECU.
I just made a couple of tests with the K + CAN commander in supported cars with EDC15 ecu and is very easy, just press a button that says "Immo off" but really I don?t know what changes made in data eeprom and I think that only supports 24C04, but not 24C02 that I think is the one with the ECU of this Seat Toledo.
Regards
ECU Commander Studio?
Hand in Hand to Protect our Efforts - Stop Hunting Our Work
>>>>>EBAY SELLERS<<<<<
I'm not Sharing Passwords!
Do not argue with an idiot. He will drag you down to his level and beat you with experience
Hi m8,
Here is the dump of 24C02, can someone make Immo Off for me?
BOSCH 0281001926
038 906 018 BT
Thanks
Last edited by marcolr; 9th December, 2010 at 11:33 PM.
Please someone can give me immo Off?
Thanks in advance
is very simple my friend you can just do adaptation whith vag com 01 engin
10 adaption
canal 00
test sauve
and all is ok
I don?t make immo off never, but it?s the first time I read that vag-com can be immo off.
I only make immo off by K+can commander for test and it works in some ECU?s but not in all.
In that case K+can commander not read the ECU and I can?t make immo off.
I read many posts in this forum and I think need modified 24C02.
Regards
drix2006 (7th November, 2018), kreepyme (17th September, 2016), rsologubov (11th May, 2017)
thanks
Bookmarks