So what? Can i use focom (clone) to resset the focus vp30?
So what? Can i use focom (clone) to resset the focus vp30?
Hello. Or tell someone how to read eeprom from pSG5 with carprog 4.01? I have only " 0000"
connect sda/scl/vcc/gnd. any ideas?
PSG5 pinout.jpg
Bosch KTS can do adaptation without any problem. Need direct connection Can, k-line and power. 5 pins. With k-line possible just read and clear errors. For adaptation need K-line and CAN!. Open PSG5 adaptation in easy tronic, press F2 and wait 900sec. If process stops in 880sec look connection of CAN wires and restart.
jackeldestripador (26th December, 2016), lossis (22nd February, 2021)
Where can I find this connector?
I need the schema and the emulator to do it, i mean the companion cable aktiv22
p2193968.jpg
Last edited by AREA22; 14th February, 2018 at 04:54 PM.
you know if with the Chinese VCM cable you can pair the VP30 to a Focus 1800 Tddi, thanks
In the end I was able to pair with a Chinese cable off the ancients, thanks to all.
Last edited by AREA22; 21st February, 2018 at 09:58 AM.
In the end I was able to pair with a Chinese cable off the ancients, thanks to all.
In the end I was able to pair with a Chinese cable of the ancients, thanks to all.
please activate
R160385679
6373-4BAD-11DE-C0CC-DEDA-0E4D-92DC-4887-74E6-0EC8-53E1-DD26-D087-6802-4EA8-7A0A
Hey,
I found a dealer who sells PSG5 units. They also have a EPS 815 test bench.
Is there a way to reset to virgin status with the EPS 815?
My dealer told me that he isn't able to "delete the immobiliser". "They only test the PSGs". I guess that he doesn't know how to make the reset.
Now I need your help. If a reset is possible with the EPS 815, I need a "step by step how to". That would allow me to explain him the steps.
Is the reset a ford specific thing or does it work with the PSGs of all brands?
I thank you in advance.
Last edited by unimetal; 28th October, 2019 at 07:36 PM.
Dear Dks
Do you knew how to adapt send hand vp44 ford pump (ford fucus 2003) using launch or forscan???
Thanks in advance
Regrads
Envoyé de mon iPhone en utilisant Tapatalk
hi mates i have repaired PSG5 on ford connect , i connect the BOSCH KTS 520 to PSG5 head unit directly with the connections in images , and this is what i get in pictures.(i also deleted the Error Memory,the DTC's successfully deleted).
So now i need to make the unit VIRGIN to equip it on another car same year , i read and asked many times that the BOSCH KTS can do it , now i need to know this ADAPTATION operation that shows in last image , is it the same thing with make the Head Virgin (IMMO OFF) or not ???
if someone does it before with this method please share informations(HELP)
thanks in advance , best regards for help
F2 START ADAPTATION AND PSG VIRGIN
toyota123 (13th January, 2021)
Bookmarks