kyawkyaw (22nd January, 2018)
Hey guys!
I need a bit help, we have an X5 here with damaged ECU EDC17CP45, we want to replace it but have no soft for doing ISN sync in CAS3+.
Somebody can help me to write ISN to CAS dump maybe?
In zip there is ecu eprom, CAS eprom + key cryptos
Last edited by lpf01; 7th August, 2016 at 10:33 PM.
Countless lockpicking stuff, AVDI Original, Tango, Orange 5, TMpro2, sooo mutch chinese stuffs from FVDI Full through VCDS to Benz key programmers, 3 cats and hopefully still 20 fingers......
kyawkyaw (22nd January, 2018)
Can you read SK from DDE...?
Original DDE is totally damaged in an accident.
Countless lockpicking stuff, AVDI Original, Tango, Orange 5, TMpro2, sooo mutch chinese stuffs from FVDI Full through VCDS to Benz key programmers, 3 cats and hopefully still 20 fingers......
No, I need from your used DDE
We need to change SK in Cas with that from your used DDE...
lpf01 (8th August, 2016)
DDE allfile content is attached in zip, im not sure i need the short isn or the long one in this cas
edit:
Long ISN from ECU is : 04 9B E4 E9 A5 91 53 C2 D9 0D 86 D1 51 AC 39 01
Last edited by lpf01; 8th August, 2016 at 06:02 AM.
Countless lockpicking stuff, AVDI Original, Tango, Orange 5, TMpro2, sooo mutch chinese stuffs from FVDI Full through VCDS to Benz key programmers, 3 cats and hopefully still 20 fingers......
vanos batam (9th August, 2016)
Ok, you have 2 keys programmed...
Key0 and key1
which of this 2 Keys you can read with Hitag?
Key 0 = Crypto = 2D6769872E61
Key1 = crypto = AE0B9FBF3819
Read with any Hitag programmer one of this keys
use the respective Crypto key to unlock your transponder data
and post the "Config/TMCF" code...
Last edited by dijo; 8th August, 2016 at 09:40 AM.
Key0 config is 868b8da, key1 is C8CE5DE6 ( i have key 1 with me )
Last edited by lpf01; 8th August, 2016 at 10:53 AM.
Countless lockpicking stuff, AVDI Original, Tango, Orange 5, TMpro2, sooo mutch chinese stuffs from FVDI Full through VCDS to Benz key programmers, 3 cats and hopefully still 20 fingers......
ok, this is your new Cas dump with SK from your second used DDE
with it in Cas and engine will start...
GameTheoryOptimal (9th August, 2016), lpf01 (8th August, 2016), Siham (15th February, 2017), vanos batam (9th August, 2016), Weasel3 (16th February, 2017)
Very big thanks dijo, afternoon we will try.
Countless lockpicking stuff, AVDI Original, Tango, Orange 5, TMpro2, sooo mutch chinese stuffs from FVDI Full through VCDS to Benz key programmers, 3 cats and hopefully still 20 fingers......
Hi,need long ISN from DDE8
Thanks in advanced
Mat
you solved the problem ??? i interested.....
Sory but no.
YOU NEED TO PUT THE CAS ISN IN THE DONOR DDE OTHER VISE TRANSMISSION SELECT LEVER WILL NOT WORK
Can someone help need match dde8 vith cas original ecu tricore burned need to match new vith same ecu from old have only eep data if someone can transfer isn or immo off new ecu thanks
kyawkyaw (18th January, 2018)
Bookmarks