MS1 (22nd May, 2017)
Does anyone have a problem with PROTAG after the new update? mine isnt being detected.. however on my old laptop the Tag key programmer detects it fine... but the new one it wont
DONT FORGET TO LEAVE THANKS + REP!!
DPF, EGR, O2/LAMBDA, ADBLUE, VMAX/SPEEDLIMIT, CHIPTUNING FOR PETROL/GASOLINE AND DIESEL VEHICLES!
EDC17 VAG IMMO OFF, ECU CLONING, BMW EDC17 ECU CLONING!!!
MS1 (22nd May, 2017)
@tunertool: Protag must be connected to USB not on AVDI from now on.
habbyb (22nd May, 2017)
Have same problem after latest update protag not working in my opinion the firmware is not getting flashed correctly or maybe at all, Tested the protag with my other interface that has 3-2017 software and works fine, updated that interface with latest software and now protag don't work with this one also , Must be something with the latest software,
Can any one with latest may 2017 update
do a simple test go to TAG KEY TOOL select, IR KEY and try to read any good known Mercedes or ABRITES key and post the results
Thanks to all in advance.
Will contact Abritus support for Help.See what hapens
Try installing many times on three different laptops same results
ck MD5 checksum all correct so no error in download problem must be with the software portion that handles the firmware update.
Last edited by MS1; 22nd May, 2017 at 05:00 PM.
I used protag to add a merc w204 key today and It worked just fine...?
Please add rep if I help you
MS1 (23rd May, 2017)
Yeah support replied any said must connect by USB now... any ideas why? I did notice that it programmed the Mercedes key much quicker this time...
DONT FORGET TO LEAVE THANKS + REP!!
DPF, EGR, O2/LAMBDA, ADBLUE, VMAX/SPEEDLIMIT, CHIPTUNING FOR PETROL/GASOLINE AND DIESEL VEHICLES!
EDC17 VAG IMMO OFF, ECU CLONING, BMW EDC17 ECU CLONING!!!
tunertool How did you connect the protag before ?
it is a known fact you connect PROTAG with USB to laptop,there is no other way to connect by my knowledge.
Last 6 months I own PROTAG always connected by usb to PC will not work any other way
My issue is protag not functioning properly after may 2017 software release,
I have done every possible thing I can and still not working.
Want to know if anyone have the latest update from May 2017 installed? What OS you are running
and if you can do this simple test
go to TAG KEY TOOL select, IR KEY and try to read any good known Mercedes or ABRITES key and post the results
Only with May 2017 software not interested in older versions they work fine
Thanks to all in advance.
Last edited by MS1; 23rd May, 2017 at 04:25 PM.
Mezz_cro
Did you solve your problem ? I had same situation and had to do option without good key ALLKeys lost to retreave the pass
Please read my posts above and try to do this test
go to TAG KEY TOOL select, IR KEY and try to read any good known Mercedes or ABRITES key and post the results
is simple way to tell if PROTAG working or not
I think the May 2017 update has a glitch flashing firmware in PROTAG that is why we see this issues.
Thanks in advance for all member cooperation
Last edited by MS1; 23rd May, 2017 at 04:35 PM.
does avdi work ok with odis and geko functions with passthru?
Yes ,it works good as pass-thru
Guided fault finding = Feature that many factory scan-tools have and real technician despise it.
whiskeyman (27th May, 2017)
Can someone read a3 clusters with micronas procesor? I'm pretty sure that I can read it until december '16. I've read an s3 8p past december, but I tried to read the same s3 and i can not. Advi support tell me that I only can read it trough a memory, but Fvdi can do it trough obd2 port.
hi all. i have a ford ranger all lost key which active alarm. i try program it but not connet because the car active alarm. i try disconet batterry, or waiting 10 minute go to disnalbe alarm but not ok.
how to disnable alarm?
tks all
Any one know if the fiat key and pin manager will program keys on an Iveco daily with I'd 48.
Sent from my iPad using Tapatalk
Add life to your days not days to your life
P
Bookmarks