avp3 (26th May, 2014), Johnnnyuk (24th November, 2013), matecuk1 (25th January, 2014), Voyager74656 (2nd April, 2013)
first of all i know there is a few of these thred's but this was buy far the easiest and its the most recent i think.
i am using gemini 5.1 on a DM800 clone enigma 2 the most recent sgt flip flop's bouquets http://www.digital-kaos.co.uk/forums...ularly-163750/
thanks for that sgt flip flop's
Not sure what other versions it will work on.
Download CrossEPG attched "enigma2-plugin-systemplugins-crossepg-oe1.6_0.6.0-svn-177_mipsel.ipk".
Transfer with FTP to the /tmp directory.
using the Gemini File Manager --> /tmp --> highlight the file "enigma2-plugin-systemplugins-crossepg-oe1.6_0.6.0-svn-177_mipsel.ipk" and press the Green Button (Install) to install.
Reboot the box.
Initial Configuration "CrossEPG" should appear under both menu>setup and under menu>plugins).
with a compatible editor edit the file /usr/bin/enigma2.sh
and before the line LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2
add this line
/usr/crossepg/crossepg_epgmove.sh
enter menu>setup >crossepg>configure
set storage device ...... Preferably hardisk (i had trouble with this )
preferred lamedb ..... mainlamedb
enable csv import ..... no
force epg reload on reboot.....no
download on tune......yes
scheduled download .....every hour
show as plugin ......yes
show as extention ......yes
(i think the only important one is storage device)
exit configure
and select menu>setup >crossepg>openTVproviders
press yellow (download)
then select your provider/sat i selected Sly uk open tv(astra2 on 28.2)
In Gemini Blue panel --> settings --> EPG:
Make sure the top EPG options are all off. In the bottom panel use:
File cache ..... on
change the filename ...... epg.dat
location ..... /media/hdd
Automatically save ..... off.
YOU HAVE TO CHANGE THE CACHE FILE NAME TO EPG.DAT, otherwise it will not work.
Restart again
now goto menu>setup >crossepg>download now.
it will run and retrive epg data
Restart again
now goto menu>setup >crossepg>download now.it will run and retrive epg data again.
now you should have full epg
check via epg or menu>infomation>EPG
it shoud read something like this :
116965 Events in 716 services
EPG used 6.0mb memory
if your using mutiple providers and sat's it will be larger.
Last edited by 2685danny; 7th March, 2011 at 11:08 PM.
DM800 Pro clone Merlin 3If a post was helpful use the button
avp3 (26th May, 2014), Johnnnyuk (24th November, 2013), matecuk1 (25th January, 2014), Voyager74656 (2nd April, 2013)
does the line have to be added above LD....?
because i did this on gemini dm800hd and now my box only half boots and gets stuck.
Yes is above.Originally Posted by 78692
DM800 Pro clone Merlin 3If a post was helpful use the button
iptvireland (14th March, 2016)
ive just checked mine "enigma2.sh" and its below mine looks like this:
and its workng fine#Scripte
/usr/script/inadyn_script.sh start
/usr/script/djmount_script.sh start
/usr/script/ushare_script.sh start
#Enigma
LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2
/usr/crossepg/crossepg_epgmove.sh
ret=$?
sorry about that
DM800 Pro clone Merlin 3If a post was helpful use the button
will it work on a dm800 without a
hard drive and how would i get this to work without installing a hard drive?
ok i got as far as adding the /usr/crossepg/crossepg_epgmove.sh to enigma2.sh
when i go to configure it just comes up with the message
'No disk found! Please install an hard disk or an usb memory storage and try again'
What can i do to fix this? i am trying to get this to work without the hard drive and if needs be i have a memory key that i can use.
Any help is appreciated
if you install i to flash memory it crashes i running with a harddisk. i can rember seeing my USB in the configure but i canot confirm if it wouldof worked.
do you have a usb mounted if so try remounting and/or restart box it had trouble finding my HDD event though it was mounted.
hope this helps
DM800 Pro clone Merlin 3If a post was helpful use the button
you could try /usr/crossepg/crossepg.configure
change the db_root=/media/thename of your USB device/crossepg
you will have to create the crossepg folder (the one in green)
Code:db_root=/media/hdd/crossepg lamedb=lamedb providers=skyuk_astra2_28.2|krkadoni_skyuk_xepgdb force_load_on_boot=0 download_daily_enabled=1 download_daily_hours=4 download_daily_minutes=0 download_daily_reboot=1 download_tune_enabled=1 download_manual_reboot=0 download_standby_enabled=0 last_full_download_timestamp=0 last_partial_download_timestamp=0 csv_import_enabled=0 show_plugin=1 show_extension=1
DM800 Pro clone Merlin 3If a post was helpful use the button
those having problems with cross epg recognising your hard disk, then try this.
take your hard disk out and reformat using ''gparted''
in ext3 format.
i had many isuues messing around with my new hd which i installed, then getting gemini to format for me didnt help a single bit!!!
but after using gparted, i installed the drive back in again, and everything worked just fine.
New Season...New hope! YNWA.
cheers danny
excellant user guide, and epg working perfectly!
New Season...New hope! YNWA.
Thanks to all for your helpful replies reagarding this epg.
I have an external hard drive connected to my dreambox and followed the instructions to install the epg.
It installed fine and works perfect. But i have one issue, at night i turned dreambox and hard drive off at the mains, and this morning when I switched both of them on, i couldnt see hard drive on dreambox nor was there the epg.
So i unmounted the hard drive and remounted it and i downloaded the epg again from the dreambox and now its working again as it should.
Is it a bad idea to turn the mains off for the dreambox and hard drive at night?
I dont want to keep mounting hard drive and downloading epg every morning.
thanks for replies in advance.
Jagga
i had a few issues with gemini 5.1 at first, as it wud say hard drive was successfully mounted, but then realised on the epg settings ''no disk was found''
so i took the the whole drive out, connected it to my pc via the pc sata connection, and formatted using GPARTED, in ext3 format.
after that, installed it back in, gemini recognised it straight away, and worked perfect.
i have had no issues losing epg after restarting the dm800 via the mains plug.
New Season...New hope! YNWA.
Im new here - thanks for this guide.
I am trying to get it working with a USB disk.
The usb is mounted as media/hdd
I receive following error when I navigate to plugins
Any ideas?Code:some plugins are not available:SystemPlugins/CrossEPG(no module named CrossEPG.plugin)
Edit. I have resolved the issue. I have downloaded the version that was attached to the first post. However, my epg looks different to the one displayed on the pictures and I only get 2 days worth of epg. Will dig deeper, but am pretty certain it has to do with my xml file.
Thanks
Last edited by blogbytes; 4th April, 2011 at 07:08 AM.
does this work on UNOFFICIAL DREAM ELITE V.133DV3 PHOENIX EDITION which is enigma2? as i cant access file manager on my box?
Bookmarks