XPROG-BOX CERTIFICATE

[grinovsky]

PW please
is it read from xprogm updated to 5.3 and registred?

[elchip]

PW please
is it read from xprogm updated to 5.3 and registred?

No it is from one older ;-)
Regard's

[bram380]

Thank you for your efforts to get the firmware xprog-m.
Of course this takes time and costs a lot.

Just a note unlock cost MCU ATMega not cheap, it costs around USD 600-1000.

We must understand the principles that he applied in this DK forum....

[elchip]

Thank you for your efforts to get the firmware xprog-m.
Of course this takes time and costs a lot.

Just a note unlock cost MCU ATMega not cheap, it costs around USD 600-1000.

We must understand the principles that he applied in this DK forum....

So now we will see is DUMP will be available or not.
If not I will give something more wanted if yes then no more from me in future of DUMP's.

Regard's

[elchip]

Your update Bram380 work perfect.
Thank's mate for that.

[smokinjoe]

could someone upload 5.3 please as i'd like to update but having problems downloading from the net.

[bram380]

So now we will see is DUMP will be available or not.
If not I will give something more wanted if yes then no more from me in future of DUMP's.

Regard's

Firmware down grade successfull from 5.3 to 4.5
But micronas mcu not authorized.
Try to review what happend with down grade process

[elchip]

Firmware down grade successfull from 5.3 to 4.5
But micronas mcu not authorized.
Try to review what happend with down grade process

I know that but who make big mistake to make upgrade to 5.3 and get shit and was downloaded FW on time ;-)
Can easy make working XprogM.

Or who dont like as is then better buy new tool or pay unlocking tool ....

I was give for free and I hope to someone find way to make Micronas also...

Regard's

[matekhr]

I think eeprom part must be edited a little.
I didn't "downgrade" my xprog-m yet, because when looking at eeprom part I was almost sure micronas are not authorized.
(I'll explain more when I come home this afternoon.)

[agabna]

Firmware down grade successfull from 5.3 to 4.5
But micronas mcu not authorized.
Try to review what happend with down grade process

THANKS
BUT HOW WE CAN DOWN GRADE FROM 5.3 TO 4.5

[elchip]

THANKS
BUT HOW WE CAN DOWN GRADE FROM 5.3 TO 4.5

Reflash ATMEGA 64 ....



Regard's

[agabna]

Reflash ATMEGA 64 ....



Regard's

THANKS
BUT I NEED THE DATA TO REFLSH IT

[elchip]

It is nice to see I push some peoples FORWARD with XprogM.
Maybe we soon have HOMEMADE XprogM.

And for all who want something and not give same to other they must wait some better day's.
I dont see same thing from others isn't it ?

If I will see similar post I will back full no pass protected file but I expect also for all as something like that.
I can see 1000... dump's project's which is 10$ tool's ...
No one give simmilar ( maybe a couple of peoples is true ).

Regard's

[matekhr]

Here is my idea about authorizations:

Attached screenshot shows extracted eeprom part of "elchips" firmware file. (sorry, elprog, I have to put a screenshot here, I can't explain without the picture).
Looking at the marked part, you'll see it consists of 5AA5 and A55A blocks. Now look at the authorizations screen of our xprog-m programmer. In case of full authorizations, we'll have total of 22 lines, 9th line is "Development tools" and shows "-" instead of "authorized". ARM micronas are two last lines, which are not authorized in our case.
Now look again at our screenshot - let's make a presumption that 5AA5 means "authorized", and A55A means "not authorized" or "-".
That idea works perfect for first 15 lines - we have 8 authorized lines, one not authorized and then 6 authorized.
Now comes a little messy part: 11 A55A's, 3 5AA5's, 1 A55A, 2 5AA5's and finally 8 A55A's.
Counting in total, we have 19 "authorized" lines (what is good), and we need 21 to make ARM micronas authorized, too.
According to that logic, two of eight A55A's in last "unauthorized" block must be changed to 5AA5 to become "authorized".

Maybe I'm totally wrong, but somehow it seems to me this could work. Because I repaired my xprog-m programmer in other way, and now works 100%, I would like someone (Bram380 maybe?) to test my idea.
Of course, I don't know will this work at all, what about checksums etc. - it's only an idea...

[grinovsky]

perfect,if it work like you say
your are the best;my freind