Col19 (31st October, 2019)
__________________
China: OPEL Tech2 non-CAN multiplexer USB, OP-COM USB, OBDII Elm327 USB, VAG-COM 409.1/VCDS Lite 1.0 KKL USB
Homemade: UNISCAN Visa 1.83 RS-232, Renault XR25PC USB, BMW KKL USB, Nissan Consult1 USB
Col19 (31st October, 2019)
Hi, I have this PCB, needs any fixes ?
Attachment 536555
Attachment 536556
Attachment 536557
It says version 9.0, please try on cars and tell, maybe they fixed it but i dont think so, it seems bad circuit as versions 5.0 to 8.0
Col19 (31st October, 2019)
Hi I have problem with my autocom cdp+.
When I connect it to car( without laptop) It show blue light not white. And when I connect usb to laptop nothing happens, laptop dont see usb autocom... What it could be and what I can do? Also with bluetooth he can connect but then they ask for update and I cant do it...
Hi.
Have you installed the drivers? Check in the device manager if the laptop can see the tester. It should be visible in two places:
-Com port lpt
- universal serial bus controllers
If you have not installed, do it. They are in the folder with software (Driver).
Col19 (31st October, 2019)
and change USB cable, not use the china shit...
Col19 (31st October, 2019)
I tested my VCI but not connect to any car Next steep reflashed ARM = not connect to any car. I have FW for DS100E not for DS150E it is that problem ?
you make test hardware?what mesage receive? TEST OK?I think no
Carprog 8.21,xprog 5.55,galletto v54,kess and ktag rework
Col19 (31st October, 2019)
with BT and USB all tests Ok ( tested on 3 Cars)
Last edited by Domi; 27th June, 2018 at 07:56 AM.
Keep in mind, English is not my native language.
in what car you try to connect? in car with k-line or in car with CAN?
Carprog 8.21,xprog 5.55,galletto v54,kess and ktag rework
Col19 (31st October, 2019)
Car with K line
Keep in mind, English is not my native language.
I have ver 3 without blue tooth, can I add bluetooth ?
Do what you can with what you have .
Col19 (31st October, 2019)
DomiTry on a car with CAN. I had such a tester before and did not connect with cars with the K line.
http://www.digital-kaos.co.uk/forums...=1#post2035691
so the answer is no
Do what you can with what you have .
Hello,
I have a problem with my diagnostics. I use a autocom cdp pro plus tool with autocom 2013 3. And I only can connect to cars which don't have an update from the old version. So i successfully connected to audi, volkswagen and a škoda, but unsuccessfully connected to two different model volvos. So the volvos had the update star next to them but audi, volkswagen and škoda didn't. So can anyone suggest a fix for this?
Thanks!
Last edited by ankle; 1st July, 2018 at 09:08 PM. Reason: check
Bookmarks