New secondstage bootloader ssl84 for dm800se from sim2
sim2 announced release of sim2-ssl-84-dm800se today according to the plan of continuous support for sim2 dreambox users.
This great development is one of steps to achieve ability of users to enjoy latest images with latest original drivers.
sim2 also announced that work in progress to release ssl-84 for other sim2 dreambox models.
new ssl-84 is used as following
To use new ssl with original images:
To use new ssl with original images:
-Flash new ssl-84 nfi to dreambox by internet explorer or dreamup(this used once if the current dreambox bootloader is ssl82 or older).reboot the dreambox to setup mode again
-Flash original image as usual
-Flash ssl-84 nfi to dreambox again and before rebooting the dreambox
This method may not apply to few images like latest releases of edg nemesis and oozoon and better to use already patched images with new ssl built in
To use sim2 patched images with new ssl 84
if the dreambox has old ssl 82 bootloader,flash new ssl-84 nfi first by internet explorer or dreamup,reboot the dreambox again to setup mode, then flash sim2 image
if new ssl84 already flashed to dreambox just flash the sim2 image by usual method
with the new ssl ,original drivers and most recent releases of plugins are working without modifications with exception of few plugins like webinterface and software manager may need to apply available specific patches.
-for better benefit from new ssl better to use with original drivers 2-9-2011
To take backup for the flash image with integrated new ssl we advice to use TSFlashBackup v 2.0
To install and to make backup of barry allen multiboot image we advice to use sim2-barryallen v 2.0
Last edited by mfaraj57; 26th September, 2011 at 04:03 AM.
Nice work mfaraj . Will hold off using until more user feedback . Nevertheless a significant breakthrough from sim2 team again, well done to you an your people
mfaraj...that method ?can be used for clone DMse?
To use sim2 patched images with new ssl 84
if the dreambox has old ssl 82 bootloader,flash new ssl-84 nfi first by internet explorer or dreamup then flash sim2 image
if new ssl84 already flashed to dreambox just flash the sim2 image by usual method
For SIM2.10 dm800SE with 82 bootloader
1. flash sim2SE_SSL84_0923-nfi.rar
2. flash sim2.01 bl84 cracked image
1. flash sim2SE_SSL84_0923-nfi.rar
this step may be necessory if dreambox loaded with ssl76 but not must for dm with ssl82
Thanks mfaraj, just to clarify, we dont need to flash 84 SSL over 82, only flash 84 if you have old 76 in flash .
82 flash can upgrade to 84 with normal 84 image flash only?
Dear mfarai57 can this be done with dm800 hd original also an also what is the advantage of upgrading to sim2.1 please answer..thanks
If you got a genuine box mate then a sim2 would not be an upgrade. Just flash a genuine later image an you will have what all these clones are trying to achieve
Hallo ,
I tried to flash with ssl-84 bat I get every time :
wrong architecture structure message.
Any help?
what sim you got make shure the image is suitable for your sim look here http://www.digital-kaos.co.uk/forums...-dm800-122157/ and here where you are now http://www.digital-kaos.co.uk/forums...e-sim2-229354/
Whats new in SSL84 ?
SSL82 is working fine !
Can I use older BL then I got ? ie 82 instead 84
sim2 dm800se ssl84b
-used only with original drivers 9-11-2011
-nfi,bin and ipk files are attached
-better to use already prepared images with new ssl
all latest images with the new ssl will be available soon
sim2 team
Bookmarks