Calterm ecfg files

[rubiconrojo]

Hello all,
I?m newbie with CALTERM III sw tool. I need to change max RPM and increase 250 RPM due to application on QSL9 ECM 850 , ECM CODE W90572.02, ECM part number 4921776, option DO 90921, option SC 9621. The thing is I know is necessary special files to access to ECU with CALTERM. As I red in other threads, for old engines is necessary e2m files but for new core ECM and COMMON RAIL engines is necessary cfgm files. My doubts on this matter as follow:
1. Every ECU has its own file to access with CALTERM and modify parameters and calibration or is for family engine, application, SW fase or options on engine? So, is there a family ECU file or unique for any individual ECU?
2. What is exactly the function of this files to use CALTERM and access to ECU? With INSITE we don?t need any special file for any family ECU or engine!!
3. CALTERM it doesn?t have internal generic files to access any ECU in standard mode? let?s say
4. Could be possible this files are the arrange map or internal memory dealing with microprocessor and how to access them and modify?
5. Someone can explain how to upload the file to CALTERM and then comunicate with ECU? I tried, but with no success to connect ECU!!!
6. Someone can provide the file for QSL9 ECM850 with data I mention above? It?s really necessary to increase this 250RPM
7. Anybody did this change before to increase RPM limit on this ECM? Is associated to any parameter to be modified by CALTERM.
Any advice, guidelines or "tricks" on dealing with CALTERM would be really apreciated, I?m getting started.
Thanking in advance to everybody .

[frankiegr]

I am looking for the ecfg for a CM2250 so I can upload a calibration.
Thanks

[jr2185]

Hello all,
I?m newbie with CALTERM III sw tool. I need to change max RPM and increase 250 RPM due to application on QSL9 ECM 850 , ECM CODE W90572.02, ECM part number 4921776, option DO 90921, option SC 9621. The thing is I know is necessary special files to access to ECU with CALTERM. As I red in other threads, for old engines is necessary e2m files but for new core ECM and COMMON RAIL engines is necessary cfgm files. My doubts on this matter as follow:
1. Every ECU has its own file to access with CALTERM and modify parameters and calibration or is for family engine, application, SW fase or options on engine? So, is there a family ECU file or unique for any individual ECU?
2. What is exactly the function of this files to use CALTERM and access to ECU? With INSITE we don?t need any special file for any family ECU or engine!!
3. CALTERM it doesn?t have internal generic files to access any ECU in standard mode? let?s say
4. Could be possible this files are the arrange map or internal memory dealing with microprocessor and how to access them and modify?
5. Someone can explain how to upload the file to CALTERM and then comunicate with ECU? I tried, but with no success to connect ECU!!!
6. Someone can provide the file for QSL9 ECM850 with data I mention above? It?s really necessary to increase this 250RPM
7. Anybody did this change before to increase RPM limit on this ECM? Is associated to any parameter to be modified by CALTERM.
Any advice, guidelines or "tricks" on dealing with CALTERM would be really apreciated, I?m getting started.
Thanking in advance to everybody .

Here is the ecfg file for your engine. You can sometimes use a configuration that doesn't quite match, but I got your calibration off the incal disc and tried it and this matches exactly.
I haven't used incal whole a lot yet, but I believe the function is just to define where all the maps and settings are in the ecu.
I`m not sure how to go about increasing rpm limit.
I also attached a guide that may help with learning how to use calterm.

4980235-CM850_pn3954430_15.1.0.11.zip
Calterm Guide.zip

[jr2185]

I am looking for the ecfg for a CM2250 so I can upload a calibration.
Thanks

Try this one.
ecfg.zip

[shisik]

please help!
i need E2M file for ECM PN 49217776 ISLe4 AAJ AP90031.cal
or please PM

[alsop]

AP90031.05.rar

please help!
i need E2M file for ECM PN 49217776 ISLe4 AAJ AP90031.cal
or please PM

Try this file

[shisik]

AP90031.05.rar

Try this file

thanks ))) this cal file

[bazdan902]

Hey there guys.. Does anyone know if it's possible to get newer ecfg files for the cm871? I have rawzes but the June 2014 disc does not match. Thanks

[Israel07]

Password please

[3stigi4]

Hello guys help me with insite 7.6.0 i need the key pro plus please my PCID 3AD04A25 please and thanks

[Rerouter]

Hello, I am looking for the ecfg file for a ISL 8.9Ltr CM2150, 2011 Manufactured year

I am hoping to disable the Adblue system,

[rubiconrojo]

Hello jr2185,

First of all thanks so much for the file, at least now I can connect to the module but I can not upload calibration, at 12% always got error of downloading. Do you have original calibration for that ECM. I know is a file with extension .xcal Do you know how i CAN GET iT FROM incal dvd. I have some incal dvd but I can not read or extract calibration from them. I guess I need calibration load on CALTERM and then editing calibration on parameters or look up tables and download on the ECM. Now I?m concern to damage ECM if I try to download something wrong. At lest I would like to have ori calibration just in case.
Thanks a lot for your help is really useful for me.
Kindesr regards.

[alsop]

Post the Incal calibration you want converted to CaltermIII format. PM me and I'll convert it to xcal for you.

[rubiconrojo]

Alsop,

Here you have the file.
Thanks.

[alsop]

Here is the calibration converted to Calterm format. You can view it with word pad. Use winrar to unpack and save where ever you want. The original file won't have an extension xcal until you edit it and save it with the program. You do have the correct .ecfg file and everything should work fine.
W90572.rar

This is a link to Calterm on how I used Calterm to edit some files in an ISM
http://www.digital-kaos.co.uk/forums...ml#post1855245