Free tuningfiles - Personalized remap

**boylonden** · 13th April, 2018, 09:33 PM

can you remap my file please. My original ecu is defect this one is from another car. I have 307 SW Navtech 2004 2liter aut. can you get the remove the code en tuning it?

**kamsky** · 14th April, 2018, 01:53 AM

Originally Posted by baupericol

8906019GG
1,9l R4 EDC
WAUZZZ8E02A199451
1024K FSUP
1037351908
0281010813
Flash:29F400BT audi a4 101 hp please more hp ...chiptuning 130hp

Try if you want. Pass PM. If you like it hit thx and rep. Regards

**Filipe Afonso** · 14th April, 2018, 01:57 AM

Try and Report me, dont forget thanks.

**tom2ba** · 14th April, 2018, 09:40 AM

i need an Pop and bang file for this car.

THANK You Verry Much

**jrv540** · 14th April, 2018, 08:51 PM

2000 540i 6 speed manual
I want more power,
mods
4 inch MAF, 4.8L large throttle body conversion
M60 intake manifold conversion
secondary air bypass plates, secondary AIR delete
Immo off would be nice, EGR off would be nice,
really want the most agressive tune I can get for a normally aspirated 4.4L 540i
I have a galetto 1260 cable, but did have some issues flashing, I Was able to recover both times with my original bin file, which I have attatched.

Thank you so much.
Jeremy

I also have an FGv54 Galetto 4 that is in the post today, if I need to do more than just provide this dump, please let me know. I am also including the EWS dump from the EWS in the vehicle.

I do thank each one of you for your information and help with this.

**Peugje** · 15th April, 2018, 08:55 PM

what do you have?
The complete bin file of the am29F400BB?
do I have to make a copy of it?

**otylerhd** · 16th April, 2018, 03:58 AM

hey i have a 1.8t jetta 2003 can you add nls,lc,2 step and stage one for me? ill post my files if soo i just wasn't sure if you where still doing flashes thanks in advanced

**vrankov** · 16th April, 2018, 06:07 AM

Hello! Can someone help me with Stage 01 for this file:
BMW E65 730d 218hp
HW: 0281010898
SW: 1037361884
VIN nr.: WBAGM21090DR47198

Best regards and thanks in advance!

**pedjica** · 16th April, 2018, 01:52 PM

Please help with dpf off
Address 01: Engine Labels: 03G-906-018-BMN.CLB
Control Module Part Number: 03G 906 018 DH HW: 03G 906 018 DH
Component and/or Version: R4 2.0l PPD1.2 G 4346
Software Coding: 0000172
Work Shop Code: WSC 66565 257 00032
VCID: EED98C7CF98749347A-80BA

**jelmer52** · 16th April, 2018, 03:21 PM

more power and immo off please flash file am29f200bb and 24c04 immo eprom

Thanks for help

**jelmer52** · 16th April, 2018, 05:58 PM

Here you go

Please help with dpf off
Address 01: Engine Labels: 03G-906-018-BMN.CLB
Control Module Part Number: 03G 906 018 DH HW: 03G 906 018 DH
Component and/or Version: R4 2.0l PPD1.2 G 4346
Software Coding: 0000172
Work Shop Code: WSC 66565 257 00032
VCID: EED98C7CF98749347A-80BA