Hy. I connected to VW Amarok 2010 and 2012my with Soft 18.2.1 PL and 18.9.0 EN. It seems to work well.
But I'm not sure about the long coding.
Hy. I connected to VW Amarok 2010 and 2012my with Soft 18.2.1 PL and 18.9.0 EN. It seems to work well.
But I'm not sure about the long coding.
Last edited by Mario6; 13th October, 2018 at 07:33 PM.
Pass Please
Is it possible to update VCDS 12.12 to something newer?
Last edited by Rafik89; 22nd October, 2018 at 04:37 PM.
No chance for your cable(NEC inside) buy one with Atmega162.
do you recommend something? Germany
Sorry, I have no advice for this request.
ATMEGA162 + FT232RQ + 9241 + 16V8B +ATA6561 ?
Yes, decent one Could be with Atmega +Ft232RL+Gal/Atf
You try google with obd2cartool..
Last edited by alexm1; 22nd October, 2018 at 05:40 PM.
thanks, I ordered something new.
Hello guys i ordered from Aliexpress 18.2.0 version loader v6 installed everything but when i open vcds loader in test says interface found, status "Not plugged in to car" when obviously it is tried on audi a3 2014 with windows 7 then tried with windows 10 and audi a3 2010 and another laptop with win7 and audi a5 2009 same thing Interface found "Not plugged in to car".
Any ideas to whats wrong? and can anyone upload 18.2.0 with loader that he is using and working
metkox360Did you connect the interface to the car during the test? If not, connect and then test.
Did you paste, (swapped) the V 6.0 loader into the program folder? If so then check again whether the plug is well connected to the car OBD II and the LED is green.
Alternatively, if you have Chip Atmega 162 inside, download the V7.0 loader and reprogram the cable to 18.9.0 EN version.
http://www.digital-kaos.co.uk/forums...=1#post3401808
POST nr 7011
Last edited by Mario6; 13th November, 2018 at 07:02 PM.
I also have something like that.
Bookmarks